Asmbly Wiki - User contributions [en]

https://wiki.asmbly.org/api.php?action=feedcontributions&feedformat=atom&user=Laurel Asmbly Wiki - User contributions [en] 2026-04-22T01:47:23Z User contributions MediaWiki 1.35.8 https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3511 Ceramics Policy 2025-05-01T21:06:01Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. This is separate from the required Orientation & Facility Tour.<br /> <br /> We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.***<br /> <br /> <nowiki>***</nowiki>Your pieces must be FULLY bone dry before placing them on the kiln shelves. Pieces that are still wet will be emailed by the Kiln Operators and asked to moved to your shelf to dry fully. <br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece. Hours are listed [https://asmbly.org/events/ here] on the Asmbly Event Schedule<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece. Hours are listed [https://asmbly.org/events/ here] on the Asmbly Event Schedule<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> <br /> * All glazes provided are lead free and Food Safe. <br /> * Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> ** Glaze and clay do not mix, please prevent glaze from getting on the canvas<br /> * Clean up glaze brushes and bowls provide for community use when finished. <br /> * Do NOT glaze directly out of the jars, use the provided bowls to pour glaze into. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze or Stoneware at Cone 6 (~2200℉).<br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3510 Ceramics Policy 2025-05-01T20:12:17Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. This is separate from the required Orientation & Facility Tour.<br /> <br /> We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.***<br /> <br /> <nowiki>***</nowiki>Your pieces must be FULLY bone dry before placing them on the kiln shelves. Pieces that are still wet will be emailed by the Kiln Operators and asked to moved to your shelf to dry fully. <br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> <br /> * All glazes provided are lead free and Food Safe. <br /> * Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> ** Glaze and clay do not mix, please prevent glaze from getting on the canvas<br /> * Clean up glaze brushes and bowls provide for community use when finished. <br /> * Do NOT glaze directly out of the jars, use the provided bowls to pour glaze into. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3509 Ceramics Policy 2025-05-01T20:10:28Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. This is separate from the required Orientation & Facility Tour.<br /> <br /> We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when DRY and ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> <br /> * All glazes provided are lead free and Food Safe. <br /> * Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> ** Glaze and clay do not mix, please prevent glaze from getting on the canvas<br /> * Clean up glaze brushes and bowls provide for community use when finished. <br /> * Do NOT glaze directly out of the jars, use the provided bowls to pour glaze into. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3508 Ceramics Policy 2025-05-01T20:08:13Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. This is separate from the required Orientation & Facility Tour.<br /> <br /> We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> <br /> * All glazes provided are lead free and Food Safe. <br /> * Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> ** Glaze and clay do not mix, please prevent glaze from getting on the canvas<br /> * Clean up glaze brushes and bowls provide for community use when finished. <br /> * Do NOT glaze directly out of the jars, use the provided bowls to pour glaze into. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3507 Ceramics Policy 2025-05-01T20:05:35Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> <br /> * All glazes provided are lead free and Food Safe. <br /> * Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> ** Glaze and clay do not mix, please prevent glaze from getting on the canvas<br /> * Clean up glaze brushes and bowls provide for community use when finished. <br /> * Do NOT glaze directly out of the jars, use the provided bowls to pour glaze into. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3506 Ceramics Policy 2025-05-01T20:01:08Z

<p>Laurel: /* These Mid-fire Glazes are currently available in studio for Members & Classes to use: */</p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> All glazes provided are lead free and Food Safe. <br /> <br /> Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> <br /> Clean up glaze brushes and bowls provide for community use when finished. <br /> <br /> ===== Mid-fire Glazes Currently in Studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3505 Ceramics Policy 2025-05-01T19:58:39Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> All glazes provided are lead free and Food Safe. <br /> <br /> Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> <br /> Clean up glaze brushes and bowls provide for community use when finished. <br /> <br /> ===== These Mid-fire Glazes are currently available in studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Clay Body & Glaze Approval System =<br /> Asmbly is a community of makers and creators, as such we want to honor the experimental nature that comes with clay and crafting. Ceramics has an endless amount of processes and abilities when it comes to glazing and firing, and we have created a system that strives to be fair and balanced to non-approved clay and glazes, while also maintaining the safety of member’s pieces and the Kilns at Asmbly. <br /> <br /> # As of 4/22/2025 the Kilns will be fired to: <br /> ## Bisque Fired at Cone 04 (~1900-1940℉)<br /> ## Low-fire Glaze at Cone 04 (~1940℉)<br /> ## Mid-fire Glaze at Cone 6 (~2200℉). <br /> # Clay or glazes that need a cooler or hotter maturation temperature will currently not be accepted. <br /> ## This could change in the future at the discretion of Asmbly<br /> ## Special projects may be considered<br /> # Clay and glaze test pieces will be checked in the same way as other pieces, with the “Kiln Check In Form”, but will be placed on the Test Shelves<br /> # We will not accept Glazes with Lead in any form in the studio<br /> # The Skutt Kiln (Helios) is the test kiln<br /> # Your piece may wait for some time, until we have a full load, and is fully dry before being fired<br /> <br /> # This is up to the discretion of the Kiln Operators<br /> <br /> Asmbly Makerspace is not responsible for any cracks that could occur before, during, or after the firing process. <br /> <br /> It is rare, but if any damage to our kiln or kiln furniture is directly caused by your piece, you will be responsible for replacement or repair charges. <br /> <br /> === Clay Body ===<br /> Non-Approved clay bodies must go through the following steps to be approved<br /> <br /> # Bisque Fire: <br /> ## Please make a small piece out of your clay body, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> ## Please allow it to dry, and then dry some more, before placing on the Greenware Test Shelf<br /> ### The longer you let it dry, the less time it will spend waiting to go in to the kiln <br /> ### We will not accept pieces that are still wet<br /> # If it does not melt, crack excessively or otherwise seem dangerous it will be approved to be used along with our other approved clay bodies.<br /> <br /> === Glaze ===<br /> Non-Approved glazes must go through the following steps to be approved<br /> <br /> # Glaze Fire: <br /> ## Please make a small piece, such as a small mug, bowl, sculpture, etc.<br /> ### The piece should be no more than 6” x 6” x 6”<br /> ### Please be prepared to possibly lose this piece as it could crack or break in the test<br /> #### If you do not have a piece to test your glaze on, a vertical test tile will be provided to you by Asmbly made of Cinco Blanco<br /> ## Glaze your piece with the glaze you are testing.<br /> ### Leave 1” of unglazed ceramic at the bottom to test if it runs or drips excessively<br /> ### Leave ¼” - ½” unglazed if using a provided vertical test tile<br /> ## Please apply the same glaze technique on the test piece you plan to apply on the actual piece, in order to get an accurate test.<br /> ### Same number of layers, colors, overlaps of glazes, etc.<br /> # If it does not melt, crack excessively, craze past your liking, or otherwise seem dangerous it will be approved to be allowed in with the other glazes <br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3504 Ceramics Policy 2025-05-01T19:51:35Z

<p>Laurel: /* Clays Provided in Studio */</p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # [https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/ Cinco Blanco]<br /> # [https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/ Buffalo Wallow]<br /> <br /> * Purchase Clay at the Square Reader <br /> * Place use provided Sharpie to write your name on your bags, or box, of clay <br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf.<br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 45 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p16/Cone_5_Porcelain.html#/ Cone 5 Porcelain], $24/25lb bag<br /> # [https://www.armadilloclay.com/store/p2824/Laguna_Speckled_Buff_%28WC-403%29.html#/ Laguna Speckled Buff], $28.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p17/Laguna_B-Mix_Cone_5.html#/ Laguna B Mix], $30.50/25lb bag<br /> # [https://www.armadilloclay.com/store/p4258/Dark_Chocolate_NO.32_Cone_5%2F6_Clay.html#/ Dark Chocolate No. 32], $12.50/5lb bag<br /> <br /> NOTE: Clay brought in must be labelled with sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> All glazes provided are lead free and Food Safe. <br /> <br /> Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> <br /> Clean up glaze brushes and bowls provide for community use when finished. <br /> <br /> ===== These Mid-fire Glazes are currently available in studio for Members & Classes to use: =====<br /> ''Amaco Celadon Line''<br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> # [https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/ Snapdragon]<br /> # [https://www.armadilloclay.com/store/p644/Tangelo_%28C-65%29.html#/ Tangelo]<br /> # [https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/ Marigold]<br /> # [https://www.armadilloclay.com/store/p3826/Succulent_%28C-24%29.html#/ Succulent]<br /> # [https://www.armadilloclay.com/store/p633/Pear_%28C-41%29.html#/ Pear]<br /> # [https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/ Sky]<br /> # [https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/ Cobalt]<br /> # [https://www.armadilloclay.com/store/p642/Mulberry_%28C-57%29.html#/ Mulberry]<br /> # [https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/ Snow]<br /> # [https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/ Obsidian]<br /> # [https://www.armadilloclay.com/store/p621/Mixing_Clear_%28C-11%29.html#/ Mixing Clear]<br /> <br /> ''Amaco Satin Matte''<br /> <br /> Satin Mattes break slightly over edges and texture and boast a soft satin feel. These glazes are formulated to be 100% mixable. Use Clear Satin to lighten color tones, Satin Black to create shades, and Satin White to create tints.<br /> <br /> # [https://www.armadilloclay.com/store/p655/Red_%28SM-51%29.html#/ Red]<br /> # [https://www.armadilloclay.com/store/p657/Orange_%28SM-68%29.html#/ Orange] <br /> # [https://www.armadilloclay.com/store/p3836/Goldenrod_%28SM-60%29.html#/ Goldenrod]<br /> # [https://www.armadilloclay.com/store/p3834/Moss_%28SM-46%29.html#/ Moss]<br /> # [https://www.armadilloclay.com/store/p650/Dark_Blue_%28SM-21%29.html#/ Dark Blue]<br /> # [https://www.armadilloclay.com/store/p3832/Marble_%28SM-3%29.html#/ Marble]<br /> # [https://www.armadilloclay.com/store/p645/Black_%28SM-1%29.html#/ Black]<br /> # [https://www.armadilloclay.com/store/p647/Satin_Clear_%28SM-10%29.html#/ Satin Clear] <br /> <br /> ''Mayco Fundamentals Underglaze''<br /> <br /> Shake well. Apply to wet clay, greenware, or cone 04 bisque; use for design or solid coverage, ﬁring range from cone 06 to cone 10. To intensify color or for use on dinnerware, apply clear or matte clear glaze. For use on clay or greenware, apply and allow to dry. Fire to shelf cone 04. If desired, apply clear glaze and reﬁre to cone 06-05 for earthenware and cone 5-10 for stoneware (999° C–1285 °C). For use on bisque, apply to cone 04 bisque, apply clear glaze if desired and reﬁre earthenware to cone 06 and cone 5-10 for stoneware. Do not spray apply. <br /> <br /> # [https://www.armadilloclay.com/store/p251/Fire_Engine_Red_%28UG-206%29.html#/ Fire Engine Red]<br /> # [https://www.armadilloclay.com/store/p250/Orange_%28UG-204%29.html#/ Orange]<br /> # [https://www.armadilloclay.com/store/p229/Bright_Yellow_%28UG-46%29.html#/ Bright Yellow]<br /> # [https://www.armadilloclay.com/store/p255/Forest_Green_%28UG-210%29.html#/ Forest Green]<br /> # [https://www.armadilloclay.com/store/p246/Bright_Blue_%28UG-97%29.html#/ Bright Blue]<br /> # [https://www.armadilloclay.com/store/p244/Wild_Violet_%28UG-93%29.html#/ Wild Violet]<br /> # [https://www.armadilloclay.com/store/p226/Chocolate_%28UG-31%29.html#/ Chocolate]<br /> # [https://www.armadilloclay.com/store/p231/China_White_%28UG-51%29.html#/ China White]<br /> # [https://www.armadilloclay.com/store/p230/Jet_Black_%28UG-50%29.html#/ Jet Black]<br /> <br /> ''Dip Glazes''<br /> <br /> # [https://www.armadilloclay.com/store/p3310/Zinc-Free_Clear_Dry_%28SD-004%29.html#/ Mayco Dipping Clear, Zinc free, SD004]<br /> <br /> Mayco Jungle Gems<br /> <br /> These beautiful glazes transform in the kiln when small pieces of glass burst into color and intricate pattern during the firing process.<br /> <br /> # [https://www.armadilloclay.com/store/p317/Sassy_Orange_%28CG-753%29.html#/ Sassy Orange]<br /> # [https://www.armadilloclay.com/store/p3808/Cherry_Limeade_%28CG-1009%29.html#/ Cherry Limeade]<br /> # [https://www.armadilloclay.com/store/p3807/Blue_Guppy_%28CG-1008%29.html#/ Blue Guppy]<br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/ Amaco Celadons], $21.00<br /> # [https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/ Amaco Satin Matte], $21.00<br /> # [https://www.armadilloclay.com/store/c19/Mayco_Fundamentals_Underglaze.html#/ Mayco Fundamentals Underglaze], $19.95<br /> # [https://www.armadilloclay.com/store/c38/Amaco_Potter%27s_Choice.html#/ Potter’s Choice], $22-$37<br /> # [https://www.armadilloclay.com/store/c24/Crystal_Glazes_%28Jungle_Gems_and_Crystallites%29.html#/ Jungle Gems], $22.15<br /> <br /> NOTE: Glazes brought in must be labelled with the sharpie found at the Clay Store at Asmbly BEFORE being stored on your shelf!!<br /> <br /> == Kiln Check-In Procedures ==<br /> Currently Asmbly Makerspace is not limiting the number of pieces, or firings, you can participate in each month. We aim for a 1-2 week turnaround, but this could be longer or shorter depending on many factors. The Kiln Operators reserve the right to hold or delay a piece if it is not dry enough, or they feel the member needs to correct something to be safe to fire. The Kiln Operators will communicate with you when your piece is out of the Kiln, or before the firing if there are any issues. They can be reached at: [[Mailto:kilnops@asmbly.org|kilnops@asmbly.org]]<br /> <br /> Firing Sign In Process<br /> <br /> # Follow the QR Code to a Google Form for each type of firing<br /> ## Check in ALL your pieces with just one Google Form.<br /> ## Fill out ONE form for Bisque, and a NEW form for Glaze<br /> <br /> 2. Fill out one WHITE paper slip for EACH of your pieces<br /> <br /> # This will serve as a physical record the Kiln Operators can track as things come in and out of the Kilns. <br /> <br /> '''Example:''' You have 7 pieces: 4 for Bisque, and 3 for Glaze. You need to fill out 2 Google Forms (1 for each type of firing), and 7 white paper slips (1 to stay with each piece).<br /> <br /> = Firing System =<br /> We are aiming at Asmbly to have a turnaround of 1-2 weeks after you have placed your bone dry pieces on the shelf, to receive a fired piece. Dry pieces submitted to be fired will be put in the kilns on a first come, first in basis. There could be other factors, like not being dry enough, needing to prioritize a class, not enough pieces to fill a kiln, or other reasons that could potentially cause delays. All firing and kilns will be run by the Kiln Operators.<br /> <br /> 1. As of 4/22/2025 the Kilns will be fired to: <br /> <br /> # Bisque Fired at Cone 04 (~1900-1940℉) <br /> # Low-fire Glaze at Cone 04 (~1940℉)<br /> # Mid-fire Glaze at Cone 6 (~2200℉). <br /> <br /> 2. Special temperature firings may occur at the discretion of the Lead Kiln Operator<br /> <br /> 3. ALL pieces must have wax resist on the bottom to avoid getting stuck to the shelves or supports<br /> <br /> # If you want to put glaze all over and risk it getting stuck to the support, you must discuss this with the Lead Kiln Operators and be aware it may cause damage to your piece<br /> <br /> 3. We recommend you leave ¼”-½” around the base of your pieces to avoid sticking to the kiln shelves<br /> <br /> # This is not required at this time, just strongly advised<br /> # If serious issues arise it may be made an official policy<br /> # The Kiln Operators reserve the right to ask you to make any corrections to your<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Clay_-_Asmbly_Approved&diff=3499 Clay - Asmbly Approved 2025-04-29T02:36:52Z

<p>Laurel: </p> <hr /> <div>INSERT TEXT<br /> [[Category:Ceramics]]</div>

Laurel https://wiki.asmbly.org/index.php?title=Clay_-_Asmbly_Approved&diff=3498 Clay - Asmbly Approved 2025-04-29T02:36:13Z

<p>Laurel: Created page with "INSERT TEXT"</p> <hr /> <div>INSERT TEXT</div>

Laurel https://wiki.asmbly.org/index.php?title=Category_talk:Ceramics&diff=3497 Category talk:Ceramics 2025-04-29T02:32:52Z

<p>Laurel: /* Clay - Asmbly Approved */ new section</p> <hr /> <div>== Clay - Asmbly Approved ==<br /> <br /> INSERT TEXT</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3455 Ceramics Policy 2025-03-20T19:40:15Z

<p>Laurel: Updates</p> <hr /> <div>[[Category:Ceramics]]<br /> <br /> = Introduction =<br /> Asmbly Policies outlined in the Member Handbook, [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent, [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required free class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!<br /> <br /> = Usage Areas =<br /> Refer the Equipment-Specific time limits [[Member Handbook#Equipment-specific%20time%20limits|HERE]]<br /> <br /> ==== Tools ====<br /> You must reserve time for each tool you plan to use in Skedda. It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Pottery Wheels: 5 machines available: Max booking is 5 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Wheel in Skedda up to 5 more hours<br /> * Extruder: 1 tool available: Comes with the extruder table next to it, max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Extruder in Skedda up to 3 more hours<br /> * Slab Roller: 1 tool available: Max booking is 3 hours of time<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Slab Roller in Skedda up to 3 more hours<br /> ** NOTE: If you are making a lot of slabs, it is recommended you Book a Table with the note, “Using Slab Roller” as a User in the studio to give you somewhere besides your shelf to put the slabs. <br /> <br /> ==== Studio User ====<br /> You must book yourself as a User if you plan on sitting at a Handbuilding Table, regardless of tool booking. You must also reserve time for each tool you plan to use on Skedda (see above). It is your responsibility to CHECK SKEDDA to make sure the tool is not booked. Allow for clean up time within your booked time, NOT after. Members booked in Ceramics at the same time should work together to clean and coordinate space use.<br /> <br /> * Handbuilding Tables: 8 Users can Book up to 5 hours of time between 2 tables (4 Users/table)<br /> ** It is not a specific table spot, just that you plan on using some table space<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook yourself as a User in Skedda up to 5 more hours<br /> * Glaze Area: 2 Users can Book up to 5 hours at a time in the Glaze area<br /> ** NOTE: If you are glazing a large amount of items, please book a User table space in addition to the glaze area and put a note on the Table booking you will be, “Using Table for Glazing”, and on the Glaze booking that you will be, “Using a table”<br /> ** When your time ends, check Skedda.<br /> ** If it is not booked you can rebook the Table in Skedda up to 5 more hours<br /> <br /> ==== Community Tools/Areas ====<br /> <br /> * Please clean all tools you use from the communal tools and return to their storage location. <br /> * Place brown paper on handbuilding tables if applying glaze<br /> ** Glaze should be kept from contaminating the canvas table surfaces<br /> <br /> = Safety =<br /> <br /> * Ceramic Dust: Silica dust is going to be present in the studio<br /> ** It is highly recommended you wear a mask while in the studio for prolonged and repetitive periods; especially while cleaning up!<br /> ** Use your own personal discretion<br /> ** NEVER make another person feel bad for wearing a mask. <br /> * NEVER use a broom, WATER is the best way to safely clean up clay. <br /> * If there is dry clay on the canvas topped tables, wet it with water to remove<br /> ** Do NOT scrape dry clay, it will kick up unnecessary dust <br /> * NO FOOD in the Studio, you risk eating glaze accidentally (Closed beverage containers OK)<br /> * We have a Blue Ox Air filtration system to be installed soon to help cut back on particulates in the air<br /> <br /> = Studio Shelves =<br /> Member’s Shelves are clearly labeled with their allotted shelf size, and name.<br /> <br /> * Do NOT touch anything on any member’s shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally<br /> <br /> Steward Shelves are clearly labeled <br /> <br /> These are for the Ceramic stewards who volunteer 8-16 hours within Ceramics each month<br /> <br /> * Do NOT touch anything on the Steward Shelves<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a Steward’s piece accidentally<br /> <br /> Class Shelves are clearly labeled with the Class name and date<br /> <br /> * Do NOT touch anything on any class shelf that is not yours<br /> ** Look with your eyes, not your hands<br /> ** Do not be the one who breaks a member’s piece accidentally <br /> * Kiln Operators will be responsible for moving Class pieces to the Greenware shelf<br /> ** They will monitor moisture levels to ensure kiln safety<br /> ** They will notify they students of the status of their pieces and pick up time limits<br /> <br /> = Kilns/Kiln Room =<br /> The Kiln Room is a hot and potentially dangerous room. As such it is an authorized access room; the Kiln Operators, and the Ceramic Lead, are the ONLY people allowed to be in the Kiln room<br /> <br /> * If you see anyone in the room that is not a Kiln Operator with a clear name tag stating such, it is a Policy violation<br /> * Under NO circumstances are you allowed to touch, turn on/off, or move the kilns & kiln furniture<br /> * NEVER touch the kilns if not authorized<br /> * NEVER operate or change the setting of the Kiln Vents if not authorized<br /> <br /> = Kiln Shelves =<br /> Members are responsible for moving their OWN pieces to the Greenware and Glaze Shelves when ready.<br /> <br /> Kiln Operators and Stewards will NOT pick out pieces from member’s shelves to fill the Kiln.<br /> <br /> All pieces will be Bisque fired to Cone 05-04 and Glaze fired to Cone 6 in oxidation. There is currently no limit to the amount of work you can have fired.<br /> <br /> All pieces must have a maker’s mark on the piece somewhere. The Kiln Operators and Ceramic Lead have the right to delay a piece being fired if it is not ready, or deemed a risk. Communication will be provided to the owner in this instance. <br /> <br /> Kiln Shelves are clearly labeled with the type of firing:<br /> <br /> * Greenware: BONE DRY pieces ready to be fired for the 1st time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule or the Kiln Operator's discretion on moisture levels<br /> * Bisque Fire: Pieces that have come out of their first firing and are in the Bisque state<br /> ** Pieces will sit on the Bisque Shelf for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * Glaze Fire: Bisque fired, Glazed pieces ready to be fired for the final time<br /> ** Pieces may sit here a bit depending on the Kiln firing schedule, and the Kiln Operator's discretion on glaze moisture levels/application/adherence<br /> * Ready to Pick Up(Pick Up Shelf): Pieces that have come out of final firing and are Glazed and ready<br /> ** Pieces will sit on the Pick Up for 2 weeks total<br /> ** After the two weeks the piece will be removed and disposed of<br /> ** MEMBERS: you have 21 hours/day to move your piece to your shelf or to take home, so get it moved!<br /> ** STUDENTS: we have Open hours with a Steward on Duty they can come by to retrieve their piece<br /> *** Mondays: 4-8<br /> *** Wednesdays: 4-8<br /> *** Saturdays: 12-4<br /> * ALL pieces not picked up in their allotted time WILL be disposed of!!!<br /> <br /> = Clay & Glazes =<br /> <br /> ==== Clays Provided in Studio ====<br /> These clays are currently on sale for use in the Studio:<br /> <br /> # Cinco Blanco: <nowiki>https://www.armadilloclay.com/store/p11/Cinco_Blanco.html#/</nowiki><br /> # Buffalo Wallow: <nowiki>https://www.armadilloclay.com/store/p12/Buffalo_Wallow.html#/</nowiki><br /> <br /> * Purchase Clay at the Square ReaderKiosk in studio or [./Https://checkout.square.site/buy/2QBIDIDW5NY4BUHSYKAVY4OG Online Square Store]<br /> * Place provided receipt sticker on your bag/box of purchased clay and write your name on the sticker<br /> ** This is visual proof of your purchase so there is no confusion once the clay is on your shelf. <br /> <br /> ==== Clays at Armadillo Clay Approved for Purchase ====<br /> Armadillo Clay is a locally owned and operated store that has over 40 years of experience in Clay and its related tools. They are super nice and helpful and we are excited to be collaborating with them!<br /> <br /> These Midfire Clays are approved for usage and firing at Asmbly and available to purchase at Armadillo Clay.<br /> <br /> # [https://www.armadilloclay.com/store/p13/Buffalo_Wallow_with_Grog.html#/ Buffalo Wallow w/ Grog], $21.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p14/Cinco_Rojo.html#/ Cinco Rojo], $20.00/25lb bag<br /> # [https://www.armadilloclay.com/store/p15/Cinco_Rojo_with_Grog.html#/ Cinco Rojo w/ Grog], $21.00/25lb bag<br /> <br /> NOTE: Clay brought in must be labelled with the sticker and sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Glazes Provided in Studio ====<br /> All glazes provided are lead free and Food Safe. <br /> <br /> Lay down brown paper provided to avoid getting glaze on the clay tables or drying boards.<br /> <br /> Clean up glaze brushes and bowls provide for community use when finished. <br /> <br /> Like the beautiful ancient glazes they are modeled after, the AMACO Celadon glazes are glossy, transparent, and pool beautifully to add vivid accents to textured and carved surfaces. These playful celadons come in many colors and are 100% mixable - great for finding that perfect color!<br /> <br /> ====== These Mid-fire Glazes are currently available in studio for Members & Classes to use: ======<br /> <br /> # Snow: <nowiki>https://www.armadilloclay.com/store/p620/Snow_%28C-10%29.html#/</nowiki><br /> # Obsidian: <nowiki>https://www.armadilloclay.com/store/p617/Obsidian_%28C-1%29.html#/</nowiki><br /> # Marigold: <nowiki>https://www.armadilloclay.com/store/p643/Marigold_%28C-60%29.html#/</nowiki><br /> # Sky: <nowiki>https://www.armadilloclay.com/store/p624/Sky_%28C-21%29.html#/</nowiki><br /> # Cobalt: <nowiki>https://www.armadilloclay.com/store/p623/Cobalt_%28C-20%29.html#/</nowiki><br /> # Snapdragon: <nowiki>https://www.armadilloclay.com/store/p639/Snapdragon_%28C-54%29.html#/</nowiki><br /> <br /> ==== Glazes at Armadillo Clay Approved for Purchase ====<br /> These Midfire Glazes are approved for usage and firing at Asmbly, and available to purchase at Armadillo Clay.<br /> <br /> # Amaco Celadons, $21.00: <nowiki>https://www.armadilloclay.com/store/c37/Amaco_Celadons.html#/</nowiki><br /> # Amaco Satin Matte, $21.00: <nowiki>https://www.armadilloclay.com/store/c39/Amaco_Satin_Matte.html#/</nowiki><br /> <br /> NOTE: Glazes brought in must be labelled with the sticker and sharpie found at the Clay Station at Asmbly BEFORE being stored on your shelf!!<br /> <br /> ==== Usage Violations ====<br /> <br /> * Usage of unapproved clay & glazes will be recorded and not allowed<br /> ** It may result in damage to your or other’s pieces<br /> ** It could result in Kiln damage<br /> * Repeated reported violations will result in not being allowed to put pieces in the kiln firings AND/OR prohibition from the studio<br /> * There will be a testing and approval process created in the future for other clay bodies and glazes, but currently there are no exceptions<br /> <br /> = Discipline/Violations Policy =<br /> Asmbly Discipline Policy can be found [[Member Handbook#Discipline|HERE]]<br /> <br /> Note: The people enforcing Asmbly policies are volunteers and it's not the most fun job. Failure to comply when approached about a policy violation is very serious. Show your fellow members kindness and respect when receiving redirection. Maintaining a cooperative community space at Asmbly is very important to us and ignoring the redirection of an appointed leader in the space is a serious violation.<br /> ----</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3454 Ceramics Policy 2025-03-20T19:09:24Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]<br /> Asmbly Policies outlined in the Member Handbook [[Member Handbook#General%20Info|HERE]] apply to ALL shop areas including Ceramics. However Ceramics has some additional policies specific to the studio that are outlined below.<br /> <br /> Check out the essential rules on How to Be Excellent [[How to Be Excellent|HERE]]<br /> <br /> Ceramics Safety & Information (CSI) is the required class you must take before access to the studio with membership is granted. We are all caretakers of the shared space, so the cleanliness and maintenance is up to you!</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Policy&diff=3441 Ceramics Policy 2025-03-17T20:24:15Z

<p>Laurel: Created page with "Category:Ceramics"</p> <hr /> <div>[[Category:Ceramics]]</div>

Laurel https://wiki.asmbly.org/index.php?title=Clay_Recycling_Program&diff=3440 Clay Recycling Program 2025-03-17T20:23:15Z

<p>Laurel: </p> <hr /> <div>[[Category:Ceramics]]</div>

Laurel https://wiki.asmbly.org/index.php?title=Clay_Recycling_Program&diff=3439 Clay Recycling Program 2025-03-17T20:22:26Z

<p>Laurel: Created blank page</p> <hr /> <div></div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Volunteer&diff=3417 Ceramics Volunteer 2025-03-06T17:45:51Z

<p>Laurel: /* Ceramics Steward Duties */</p> <hr /> <div>Ceramics stewardship at Asmbly is crucial to the success of the shop and grants access to unique membership benefits. As a ceramics steward, you will be responsible for assisting members, prepping class materials, and maintaining the shop. Here’s what you need to know about ceramics stewardship. To get started, fill out the [https://docs.google.com/forms/d/e/1FAIpQLSdUdobpO5l-AqfbXgf-h8luPiYt7mFzzdTEZmAf_CchDI-WzA/viewform volunteer form]. <br /> <br /> ==== Ceramics Steward Duties ====<br /> <br /> ===== Member Assistance =====<br /> * Help members with clay and tool knowledge<br /> * Answer questions and provide guidance<br /> * Do not work on your own projects while serving as a Steward<br /> <br /> ===== Class Support =====<br /> * Trim leather-hard cylinders for Beginner Wheel classes<br /> * Glaze student pieces (for those who opted for glazing service)<br /> * Assist non-members in accessing their finished class pieces<br /> <br /> ===== Studio Maintenance =====<br /> * Clean and organize the studio to ensure a safe and functional space<br /> * Report Problems to the appropriate channels<br /> * Create and update wiki pages for ceramics equipment<br /> * Host CSIs (Ceramics Safety & Information classes)<br /> <br /> ==== Ceramics Steward Benefits and Terms ====<br /> <br /> To recognize volunteer contributions, we offer credits toward membership and shelf space.<br /> <br /> '''16 volunteer hours = one month of base Asmbly membership + Ceramics Studio Access''' <br /> <br /> This membership tier gives you access to '''all''' Asmbly shops, including ceramics. Aside from the above distinctions, the [[Volunteering at Asmbly|base volunteer terms and benefits]] apply.<br /> ==== Ceramics Steward Requirements ====<br /> In order to become a Ceramics Steward, you must:<br /> * Complete all base [[Volunteering at Asmbly|volunteer requirements]]<br /> * Complete a training with the Ceramics Shop Lead<br /> * Commit to a minimum of '''8 volunteer hours per month''' within ceramics to maintain shared shelf area, and eligibility for benefits<br /> ** The shared shelf is 24″ x 48″ x ~12″ and shared amongst all Ceramics Stewards.<br /> * Volunteers who commit to '''4 volunteer hours per week''' within ceramics will receive an '''additional full shelf''' to share with the other 16-hour Stewards<br /> <br /> ==== Volunteer Opportunities ====<br /> <br /> To best help Asmbly, you can sign up to volunteer during the below time blocks. These time blocks can be broken down into two or three hour blocks if needed. <br /> <br /> * Mondays: 4 PM - 8 PM <br /> * Wednesdays: 4 PM - 8 PM (host CSI 6-8p)<br /> * Saturdays: 12 PM - 4 PM (host CSI 12:30-2:30p)<br /> <br /> If you cannot commit to 2-4 hours within these time blocks, you can absolutely volunteer at other times by editing wiki pages, cleaning the shop, trimming cylinders, or other tasks as determined by the Ceramics Lead.</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Volunteer&diff=3416 Ceramics Volunteer 2025-03-06T17:42:27Z

<p>Laurel: /* Studio Maintenance */</p> <hr /> <div>Ceramics stewardship at Asmbly is crucial to the success of the shop and grants access to unique membership benefits. As a ceramics steward, you will be responsible for assisting members, prepping class materials, and maintaining the shop. Here’s what you need to know about ceramics stewardship. To get started, fill out the [https://docs.google.com/forms/d/e/1FAIpQLSdUdobpO5l-AqfbXgf-h8luPiYt7mFzzdTEZmAf_CchDI-WzA/viewform volunteer form]. <br /> <br /> ==== Ceramics Steward Duties ====<br /> <br /> ===== Member Assistance =====<br /> * Help members with clay and tool knowledge<br /> * Answer questions and provide guidance<br /> <br /> ===== Class Support =====<br /> * Trim leather-hard cylinders for Beginner Wheel classes<br /> * Glaze student pieces (for those who opted for glazing service)<br /> * Assist non-members in accessing their finished class pieces<br /> <br /> ===== Studio Maintenance =====<br /> * Clean and organize the studio to ensure a safe and functional space<br /> * Report Problems to the appropriate channels<br /> * Create and update wiki pages for ceramics equipment<br /> * Host CSIs (Ceramics Safety & Information classes)<br /> <br /> ==== Ceramics Steward Benefits and Terms ====<br /> <br /> To recognize volunteer contributions, we offer credits toward membership and shelf space.<br /> <br /> '''16 volunteer hours = one month of base Asmbly membership + Ceramics Studio Access''' <br /> <br /> This membership tier gives you access to '''all''' Asmbly shops, including ceramics. Aside from the above distinctions, the [[Volunteering at Asmbly|base volunteer terms and benefits]] apply.<br /> ==== Ceramics Steward Requirements ====<br /> In order to become a Ceramics Steward, you must:<br /> * Complete all base [[Volunteering at Asmbly|volunteer requirements]]<br /> * Complete a training with the Ceramics Shop Lead<br /> * Commit to a minimum of '''8 volunteer hours per month''' within ceramics to maintain shared shelf area, and eligibility for benefits<br /> ** The shared shelf is 24″ x 48″ x ~12″ and shared amongst all Ceramics Stewards.<br /> * Volunteers who commit to '''4 volunteer hours per week''' within ceramics will receive an '''additional full shelf''' to share with the other 16-hour Stewards<br /> <br /> ==== Volunteer Opportunities ====<br /> <br /> To best help Asmbly, you can sign up to volunteer during the below time blocks. These time blocks can be broken down into two or three hour blocks if needed. <br /> <br /> * Mondays: 4 PM - 8 PM <br /> * Wednesdays: 4 PM - 8 PM (host CSI 6-8p)<br /> * Saturdays: 12 PM - 4 PM (host CSI 12:30-2:30p)<br /> <br /> If you cannot commit to 2-4 hours within these time blocks, you can absolutely volunteer at other times by editing wiki pages, cleaning the shop, trimming cylinders, or other tasks as determined by the Ceramics Lead.</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Volunteer&diff=3415 Ceramics Volunteer 2025-03-05T21:37:38Z

<p>Laurel: /* Ceramics Steward Benefits and Terms */</p> <hr /> <div>Ceramics stewardship at Asmbly is crucial to the success of the shop and grants access to unique membership benefits. As a ceramics steward, you will be responsible for assisting members, prepping class materials, and maintaining the shop. Here’s what you need to know about ceramics stewardship. To get started, fill out the [https://docs.google.com/forms/d/e/1FAIpQLSdUdobpO5l-AqfbXgf-h8luPiYt7mFzzdTEZmAf_CchDI-WzA/viewform volunteer form]. <br /> <br /> ==== Ceramics Steward Duties ====<br /> <br /> ===== Member Assistance =====<br /> * Help members with clay and tool knowledge<br /> * Answer questions and provide guidance<br /> <br /> ===== Class Support =====<br /> * Trim leather-hard cylinders for Beginner Wheel classes<br /> * Glaze student pieces (for those who opted for glazing service)<br /> * Assist non-members in accessing their finished class pieces<br /> <br /> ===== Studio Maintenance =====<br /> * Clean and organize the studio to ensure a safe and functional space<br /> * Report Problems to the appropriate channels<br /> * Create and update wiki pages for ceramics equipment<br /> * Host CSIs (Ceramics Studio Introduction classes)<br /> <br /> ==== Ceramics Steward Benefits and Terms ====<br /> <br /> To recognize volunteer contributions, we offer credits toward membership and shelf space.<br /> <br /> '''16 volunteer hours = one month of base Asmbly membership + Ceramics Studio Access''' <br /> <br /> This membership tier gives you access to '''all''' Asmbly shops, including ceramics. Aside from the above distinctions, the [[Volunteering at Asmbly|base volunteer terms and benefits]] apply.<br /> ==== Ceramics Steward Requirements ====<br /> In order to become a Ceramics Steward, you must:<br /> * Complete all base [[Volunteering at Asmbly|volunteer requirements]]<br /> * Complete a training with the Ceramics Shop Lead<br /> * Commit to a minimum of '''8 volunteer hours per month''' within ceramics to maintain shared shelf area, and eligibility for benefits<br /> ** The shared shelf is 24″ x 48″ x ~12″ and shared amongst all Ceramics Stewards.<br /> * Volunteers who commit to '''4 volunteer hours per week''' within ceramics will receive an '''additional full shelf''' to share with the other 16-hour Stewards<br /> <br /> ==== Volunteer Opportunities ====<br /> <br /> To best help Asmbly, you can sign up to volunteer during the below time blocks. These time blocks can be broken down into two or three hour blocks if needed. <br /> <br /> * Mondays: 4 PM - 8 PM <br /> * Wednesdays: 4 PM - 8 PM (host CSI 6-8p)<br /> * Saturdays: 12 PM - 4 PM (host CSI 12:30-2:30p)<br /> <br /> If you cannot commit to 2-4 hours within these time blocks, you can absolutely volunteer at other times by editing wiki pages, cleaning the shop, trimming cylinders, or other tasks as determined by the Ceramics Lead.</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Volunteer&diff=3414 Ceramics Volunteer 2025-03-05T21:35:22Z

<p>Laurel: /* Ceramics Steward Benefits and Terms */</p> <hr /> <div>Ceramics stewardship at Asmbly is crucial to the success of the shop and grants access to unique membership benefits. As a ceramics steward, you will be responsible for assisting members, prepping class materials, and maintaining the shop. Here’s what you need to know about ceramics stewardship. To get started, fill out the [https://docs.google.com/forms/d/e/1FAIpQLSdUdobpO5l-AqfbXgf-h8luPiYt7mFzzdTEZmAf_CchDI-WzA/viewform volunteer form]. <br /> <br /> ==== Ceramics Steward Duties ====<br /> <br /> ===== Member Assistance =====<br /> * Help members with clay and tool knowledge<br /> * Answer questions and provide guidance<br /> <br /> ===== Class Support =====<br /> * Trim leather-hard cylinders for Beginner Wheel classes<br /> * Glaze student pieces (for those who opted for glazing service)<br /> * Assist non-members in accessing their finished class pieces<br /> <br /> ===== Studio Maintenance =====<br /> * Clean and organize the studio to ensure a safe and functional space<br /> * Report Problems to the appropriate channels<br /> * Create and update wiki pages for ceramics equipment<br /> * Host CSIs (Ceramics Studio Introduction classes)<br /> <br /> ==== Ceramics Steward Benefits and Terms ====<br /> <br /> To recognize volunteer contributions, we offer credits toward membership and shelf space.<br /> <br /> '''16 volunteer hours = one month of base Asmbly membership + Ceramics Studio Access''' <br /> <br /> This membership tier gives you access to '''all''' Asmbly shops, including ceramics. The shelf is 24″ x 48″ x ~12″ and shared amongst all Ceramics Stewards. Aside from the above distinctions, the [[Volunteering at Asmbly|base volunteer terms and benefits]] apply.<br /> ==== Ceramics Steward Requirements ====<br /> In order to become a ceramics steward, you must:<br /> * Complete all base [[Volunteering at Asmbly|volunteer requirements]]<br /> * Complete a training with the Ceramics Shop Lead<br /> * Commit to a minimum of '''8 volunteer hours per month''' within ceramics to maintain eligibility for benefits<br /> ** Volunteers who commit to '''4 volunteer hours per week''' within ceramics will receive an '''additional full shelf''' to share<br /> <br /> ==== Volunteer Opportunities ====<br /> <br /> To best help Asmbly, you can sign up to volunteer during the below time blocks. These time blocks can be broken down into two or three hour blocks if needed. <br /> <br /> * Mondays: 4 PM - 8 PM <br /> * Wednesdays: 4 PM - 8 PM (host CSI 6-8p)<br /> * Saturdays: 12 PM - 4 PM (host CSI 12:30-2:30p)<br /> <br /> If you cannot commit to 2-4 hours within these time blocks, you can absolutely volunteer at other times by editing wiki pages, cleaning the shop, trimming cylinders, or other tasks as determined by the Ceramics Lead.</div>

Laurel https://wiki.asmbly.org/index.php?title=Ceramics_Volunteer&diff=3413 Ceramics Volunteer 2025-03-04T02:38:48Z

<p>Laurel: Volunteer Criteria</p> <hr /> <div>Ceramics stewardship at Asmbly is crucial to the success of the shop and grants access to unique membership benefits. As a ceramics steward, you will be responsible for assisting members, prepping class materials, and maintaining the shop. Here’s what you need to know about ceramics stewardship. To get started, fill out the [https://docs.google.com/forms/d/e/1FAIpQLSdUdobpO5l-AqfbXgf-h8luPiYt7mFzzdTEZmAf_CchDI-WzA/viewform volunteer form]. <br /> <br /> ==== Ceramics Steward Duties ====<br /> <br /> ===== Member Assistance =====<br /> * Help members with clay and tool knowledge<br /> * Answer questions and provide guidance<br /> <br /> ===== Class Support =====<br /> * Trim leather-hard cylinders for Beginner Wheel classes<br /> * Glaze student pieces (for those who opted for glazing service)<br /> * Assist non-members in accessing their finished class pieces<br /> <br /> ===== Studio Maintenance =====<br /> * Clean and organize the studio to ensure a safe and functional space<br /> * Report Problems to the appropriate channels<br /> * Create and update wiki pages for ceramics equipment<br /> * Host CSIs (Ceramics Studio Introduction classes)<br /> <br /> ==== Ceramics Steward Benefits and Terms ====<br /> <br /> To recognize volunteer contributions, we offer credits toward membership and shelf space.<br /> <br /> '''16 volunteer hours = one month of base Asmbly membership + Ceramics Studio Access + a shared full shelf space in Ceramics''' <br /> <br /> This membership tier gives you access to '''all''' Asmbly shops, including ceramics. The shelf is 24″ x 48″ x ~12″ and shared amongst all Ceramics Stewards. Aside from the above distinctions, the [[Volunteering at Asmbly|base volunteer terms and benefits]] apply.<br /> ==== Ceramics Steward Requirements ====<br /> In order to become a ceramics steward, you must:<br /> * Complete all base [[Volunteering at Asmbly|volunteer requirements]]<br /> * Complete a training with the Ceramics Shop Lead<br /> * Commit to a minimum of '''8 volunteer hours per month''' within ceramics to maintain eligibility for benefits<br /> ** Volunteers who commit to '''4 volunteer hours per week''' within ceramics will receive an '''additional full shelf''' to share<br /> <br /> ==== Volunteer Opportunities ====<br /> <br /> To best help Asmbly, you can sign up to volunteer during the below time blocks. These time blocks can be broken down into two or three hour blocks if needed. <br /> <br /> * Mondays: 4 PM - 8 PM <br /> * Wednesdays: 4 PM - 8 PM (host CSI 6-8p)<br /> * Saturdays: 12 PM - 4 PM (host CSI 12:30-2:30p)<br /> <br /> If you cannot commit to 2-4 hours within these time blocks, you can absolutely volunteer at other times by editing wiki pages, cleaning the shop, trimming cylinders, or other tasks as determined by the Ceramics Lead.</div>

Laurel https://wiki.asmbly.org/index.php?title=Category:Ceramics&diff=3412 Category:Ceramics 2025-03-03T21:59:37Z

<p>Laurel: updated description</p> <hr /> <div>Welcome to the world of clay! The Ceramics Studio opened in March 2025 and is a new and exciting area at Asmbly Makerspace. We invite ALL levels of experience to come play in the studio. It is a bright, welcoming, collaborative environment, with Mid-fire Kilns, Clay, Glazes, and all the tools you need to create something special today. <br /> <br /> <br /> [[Category:Tools]]</div>

Laurel