CR-10S
From Asmbly Wiki
This tool is no longer at Asmbly Makerspace
The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List
The Creality CR-10S is a 3D printer at the space. Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10. This CR-10S is modified, so it may have specifications different from the stock specifications outlined in the manual. List of known modifications TBA.
| Status | Retired |
| Manufacturer | Creality |
| Model | CR-10S |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 300 x 400mm |
| Max Bed Temperature | 90(?)C |
| Max Nozzle Temperature | 230(?)C |
| Max Print Speed | 60(?)mm/s |
| Extruder Type | Bowden |
| Manual | Unknown |
| Control Interface | Octoprint |
| Network Address | http://192.168.0.175:5002 |
