Asmbly's facility is composed of three separate units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service. Our meters and outdoor disconnects are on the south side of the building around the corner from the laser exhausts.
- The 303 service feeds 200A panel L4 via a main breaker outside. L4 feeds subpanel L3 via a 100A branch circuit breaker.
- The 304 service has a 200A fused disconnect feeding a 200A main panel outside (SP6), which feeds subpanels L2 (via a switch disconnect SW1) and L5 via 100A branch circuit breakers. L5 feeds L6 via a 60 A branch circuit breaker.
- The 306 service has a 200A fused disconnect feeding panel L7 (in the multipurpose room). L7 feeds subpanel L8 via a 100A branch circuit breaker.
Restated in terms of panels:
|Panel||Location||Supply||Areas & Machines Directly Powered|
|SP6||Outside||304 Fused Disconnect|
|L1||Unused (Stored in NE closet)||N/A|
|SW1||Main shop, South wall, east side||SP6 100 A branch circuit|
|L2||Main shop, North wall||SW1||Metal Shop, Part of Fiber Laser (30 A) Air Compressor|
|L3||Main shop, South wall, east side||L4 100A branch circuit||Wood Shop, incl. Planer, Jointer, Drill Press, Router, Sander,
Band Saws, Chop/Miter Saw, Wood Lathes; Electronics Room
|L4||Main shop, South wall, east side||303 Main Breaker||AC/Heating Units|
|L5||Main shop, South wall, west side||SP6 100A branch circuit||AC/Heating Units; Wood Shop Main Dust Collector|
|L6||Main shop, South wall, west side||L5 60 A branch circuit||Wood Shop, incl. Saw Stop Table Saw, Small CNC, Sanding Table|
|L7||Multipurpose Room||306 Fused Disconnect||Laser Room, 3D Printing Room, Textiles, Multipurpose Room, Lobby|
|L8||Main shop, West wall||L7 100A branch circuit||Large CNC, Part of Fiber Laser (2 x 20 A)|