View source for Form 2

{{DISPLAYTITLE:<span style="color: white; background-color:lightblue">{{PAGENAME}}</span>}}
Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly.  We also have Form Wash and Form Cure post-processing equipment.  Only resin purchased from Asmbly may be used in these printers.

{{Required|Intro to Resin 3D Printing}}
{{ExtraCost}}

{{ToolPhoto|Form2.jpg}}
{{ToolPhoto|FormPost.jpg}}

== Maintenance ==
After a failed print, it may be helpful to print a few layers of this "cleaning mesh", then remove it, to pull off residue from the previous job. Formlabs has a [https://support.formlabs.com/s/article/Cleaning-a-failed-print-with-the-cleaning-mesh?language=en_US help page] for this for the Form3 printer, but the official mesh doesn't seem to be available.

[[File:Form2-cleaning-mesh-hex.stl]]

== Resources ==
* [[Media:Form2_User_Manual.pdf|Form2 User Manual]]
* [[Media:Form_Wash_User_Manual.pdf|Form Wash User Manual]]
* [[Media:Form_Cure_User_Manual.pdf|Form Cure User Manual]]


{{Hosted|James Manley}}
{{Owned}}
[[Category:3D Printing]]