View source for Big CNC

The Big CNC is a custom CNC router designed and built by Danny Miller.  It has a maximum cutting area of 5' by 8'

{{Required|Big CNC}}

<p align=center>
[[File:BigCNC.png|720px]]
</p>

==Checklist==
Before I Start
* Switch on the two power outlets
* Wear Glasses and Closed Shoes
* Fix your work to the table (nylon nails, screws, double sided tape)
* Mount the bit
* Wrak & Home
* Switch on Dust Collection
* Make sure the table is cleared of all obstructions.

When I'm done
* Shutdown the two power outlets.
* put wrenches, bolt, thingy back in the box in the CNC cabinet.
* Clean up the remaining dust.

==Tooling==
While there's often an assortment of tools to be found around the space, regular users will want to purchase their own router bits.

==Resources==
* [https://1drv.ms/w/s!Ajg_ByRodrxLiwxtFEybyEVCtUj_?e=TiG9WD Class Notes]
* [https://www.vectric.com/support/tutorials/vcarve-pro VCarve Tutorials]
* [https://www.youtube.com/channel/UCrwn2uKl16pnC-GMgB75Cag LinuxCNC Tutorials (video)]

{{Hosted|Danny Miller}}
[[Category:Woodshop]]