EinScan-SE 3D Scanner - Revision history

Aneel: Added images

2025-10-15T13:44:36Z

Added images

Aneel at 22:03, 13 October 2025

2025-10-13T22:03:23Z

Aneel at 21:57, 13 October 2025

2025-10-13T21:57:00Z

Aneel at 21:52, 13 October 2025

2025-10-13T21:52:02Z

Aneel: Initial

2025-10-13T21:39:32Z

Initial

New page

{| class="wikitable"
|Scan Mode
|Fixed Scan with Turntable
|Fixed Scan without Turntable
|-
|Mode of Alignment
|Feature; Manual; Turntable
|Feature; Manual
|-
|Single Shot Accuracy
| colspan="2" |≤0.1 mm
|-
|Minimum Scan Volume
| colspan="2" |30 × 30 × 30 mm
|-
|Maximum Scan Volume
|200×200×200 mm
|700×700×700 mm
|-
|Single Scan Range
| colspan="2" |200×150 mm
|-
|Scan Speed
| colspan="2" |Single Shot<1 s

Turntable<45 s
|-
|Point Distance
| colspan="2" |0.17 mm ~ 0.2 mm
|-
|Texture
| colspan="2" |Yes
|-
|File Format
| colspan="2" |OBJ, STL, ASC, PLY, 3MF
|-
|Camera Resolution
| colspan="2" |1.3 Mega Pixels
|-
|Light Source
| colspan="2" |White LED
|-
|Working Distance
| colspan="2" |290 ~ 480 mm
|-
|Computer Requirements (Required)
| colspan="2" |USB:1 ×USB 2.0 or 3.0; OS: Win7, 8 or 10 (64 bit); Graphic Card: Nvidia series; Graphic memory: ＞1G; CPU: Dual-core i5 or higher; Memory: ＞8G
|-
|Computer Requirements (Recommended)
| colspan="2" |Graphics card: NVIDIA GTX660 or higher； Graphics memory: ＞2 G; CPU: Dual Core I5 or higher; Memory: ＞16 G
|-
|Scanner Body Weight
| colspan="2" |2.5 kg
|-
|Dimension
| colspan="2" |570×210×210 mm
|-
|Power Supply
| colspan="2" |40 w
|-
|Input Voltage
| colspan="2" |DC：12 v, 3.33 A
|-
|Calibration Board
| colspan="2" |Standard
|-
|Turntable
| colspan="2" |Standard
|-
|Load Capacity of Turntable
| colspan="2" |5 kg
|}

== Hardware ==

=== 3D Scanner ===
The scanner includes the following items:

[ Image Here ]

=== Laptop ===
Asmbly has a laptop dedicated to the use of the scanner. The windows password is 12341.

=== Other Helpful Items (not supplied by Asmbly) ===

* Mounting putty (blue tack) will help hold your item in certain orientations.
* 3D scan spray/Talc powder will help the 3D scanner to capture highly reflective, transparent and deep black surface.

@@ Line 5: / Line 5: @@
 The 3D Scanner can be found on the table to the right of the Filament Printer enclosure.
-<INSERT PHOTO OF EQUIPMENT>
+[[File:EinScan-SE parts.png|thumb]]
 == Safety ==
@@ Line 111: / Line 111: @@
 You will probably want to move the scanner and laptop to a table that provides more space to work.
-Connect Cables:
+=== Connect Cables ===
 Plug all cables into both the scanner and the laptop.
-Power On:
+=== Power On ===
 Turn on the scanner by pressing the power button for at least 2 seconds.
-Launch Software:
+=== Launch Software ===
 Open the EXScan software.
-Calibrate:
+=== Calibrate ===
 For optimal results and accuracy, calibrate the scanner before starting any scans. Follow the on-screen instructions to calibrate using the calibration plate (a square board with dots).
 Optional: When scanning models with color texture, perform a white balance calibration using a white piece of paper.
 Select the appropriate brightness to minimize red areas in the live camera feed. The default turntable steps are set to 8, which works well for most items, but feel free to adjust if necessary. Then, click Start Scan on the right to begin the scanning process.
 Once the scan completes after the 8 turns, click on Apply Edit to complete the current scan.
 Adjust the orientation of the item to capture any missing areas from the first scan, and repeat the process as needed. Once you have captured sufficient detail around the item, click Global Optimization to complete the scan.
 The software will align all of the scan. If the result looks good, hit Confirm.
 Once the scan has been aligned, turn the point cloud into mesh by clicking on Mesh Model.
 Select type of mesh:
 Then export your 3D model to the appropriate file format:
 == Cleanup ==

@@ Line 1: / Line 1: @@
 The 3D Scanner can be found on the table to the right of the Filament Printer enclosure.
@@ Line 138: / Line 142: @@
 {{UniversalCleaning}}
 == Resources ==

@@ Line 142: / Line 142: @@
 ==== Manual ====
 ==== Discourse Links ====
@@ Line 154: / Line 156: @@
 == Common Projects ==

@@ Line 1: / Line 1: @@
 {| class="wikitable"
 |Scan Mode
@@ Line 71: / Line 93: @@
 | colspan="2" |5 kg
 |}
 == Hardware ==