Electrical Infrastructure - Revision history

Mgmoore: Changed all occurrences of "new metal shop" to just "metal shop"

2025-10-23T01:59:44Z

Changed all occurrences of "new metal shop" to just "metal shop"

Mgmoore: Updated for wood lathe move, plus minor corrections.

2025-08-06T04:04:13Z

Updated for wood lathe move, plus minor corrections.

Mgmoore at 02:52, 20 January 2025

2025-01-20T02:52:54Z

Mgmoore at 02:49, 20 January 2025

2025-01-20T02:49:35Z

Mgmoore at 23:30, 19 January 2025

2025-01-19T23:30:00Z

Mgmoore at 23:03, 18 January 2025

2025-01-18T23:03:25Z

Mgmoore at 17:41, 18 January 2025

2025-01-18T17:41:56Z

Mgmoore at 17:41, 18 January 2025

2025-01-18T17:41:17Z

Mgmoore at 17:40, 18 January 2025

2025-01-18T17:40:40Z

Mgmoore at 17:28, 18 January 2025

2025-01-18T17:28:22Z

@@ Line 1: / Line 1: @@
 Asmbly's facility is composed of five (out of six) units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service.  Our meters and outdoor disconnects are on the south side of the building.
-* The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both located in the new metal shop.
+* The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both located in the Metal Shop.
 * The 302 service has a 200A fused disconnect which directly feeds panel L10 in Ceramics.
 * The 303 service feeds an outside service panel with one 200A breaker which feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
@@ Line 59: / Line 59: @@
 |-
 |L8
-|New Metal Shop (Northwest wall)
+|Metal Shop (Northwest wall)
 |100 A
 |301 Service Panel
-|New Metal Shop
+|Metal Shop
 |-
 |L9
-|New Metal Shop (Northwest wall)
+|Metal Shop (Northwest wall)
 |100 A
 |301 Service Panel

@@ Line 5: / Line 5: @@
 * The 303 service feeds an outside service panel with one 200A breaker which feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
 * The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L2 (via a switch disconnect SW1, located on the south wall of the woodshop, east of the centerline) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
-* The 306 service has a 200A fused disconnect which directly feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker.
+* The 306 service has a 200A fused disconnect which directly feeds panel L7 in the multipurpose room. L7 feeds subpanel L1 via a 100A branch circuit breaker.
 Restated in terms of panels:
@@ Line 25: / Line 25: @@
 |100 A
 |304 Service Panel (via SW1)
-|Old Metal Shop, Air Compressor
+|Wood Shop Garage Outlets, Metal Shop Welding Area, Wood Lathes, Air Compressor
 |-
 |L3
@@ Line 32: / Line 32: @@
 |L4 branch circuit
 |Wood Shop, incl. Planer, Jointer, Drill Press, Router, Sander,
-Bandsaws, Chop/Miter Saw, Wood Lathes; Electronics Room
+Bandsaws, Chop/Miter Saw; Electronics Room
 |-
 |L4

@@ Line 3: / Line 3: @@
 * The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both located in the new metal shop.
 * The 302 service has a 200A fused disconnect which directly feeds panel L10 in Ceramics.
-* The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
+* The 303 service feeds an outside service panel with one 200A breaker which feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
-* The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
+* The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L2 (via a switch disconnect SW1, located on the south wall of the woodshop, east of the centerline) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
 * The 306 service has a 200A fused disconnect which directly feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker.

@@ Line 1: / Line 1: @@
 Asmbly's facility is composed of five (out of six) units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service.  Our meters and outdoor disconnects are on the south side of the building.
-* The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.
+* The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both located in the new metal shop.
-* The 302 service has a 200A fused disconnect which directly feeds panel L10 in Ceramics.  L10 feeds subpanel L11 via a 100 A branch circuit breaker.
+* The 302 service has a 200A fused disconnect which directly feeds panel L10 in Ceramics.
 * The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
 * The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
@@ Line 72: / Line 72: @@
 |L10
 |Ceramics Shop (South wall)
-|200 A *
+|200 A
 |302 Fused Disconnect
 |Ceramics
 |}
 <nowiki>*</nowiki> Feeds another panel, limiting practical capacity.
 [[Category:Operations]]
 [[Category:Infrastructure]]

@@ Line 1: / Line 1: @@
 Asmbly's facility is composed of five (out of six) units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service.  Our meters and outdoor disconnects are on the south side of the building.
-* The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.
+* The 301 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.
-* The 302 service has a 200A fused disconnect which feeds panel L10 in Ceramics.  L10 feeds subpanel L11 via a 100 A branch circuit breaker.
+* The 302 service has a 200A fused disconnect which directly feeds panel L10 in Ceramics.  L10 feeds subpanel L11 via a 100 A branch circuit breaker.
 * The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4.  L4 feeds subpanel L3 via a 100A branch circuit breaker.
 * The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
-* The 306 service has a 200A fused disconnect which feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker.
+* The 306 service has a 200A fused disconnect which directly feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker.
 Restated in terms of panels:
@@ Line 19: / Line 19: @@
 |100 A
 |L7 branch circuit
-|Large CNC, Part of Fiber Laser (2 x 20 A)
+|Large CNC
 |-
 |L2
@@ Line 25: / Line 25: @@
 |100 A
 |304 Service Panel (via SW1)
-|Metal Shop, Air Compressor
+|Old Metal Shop, Air Compressor
 |-
 |L3
@@ Line 62: / Line 62: @@
 |100 A
 |301 Service Panel
-|Metal Shop
+|New Metal Shop
 |-
 |L9
@@ Line 80: / Line 80: @@
 |100 A
 |L10 branch circuit
-|Ceramics
+|Ceramics (scheduled for removal)
 |}
 <nowiki>*</nowiki> Feeds another panel, limiting practical capacity.
 [[Category:Operations]]
 [[Category:Infrastructure]]

@@ Line 18: / Line 18: @@
 |Wood shop, West wall
 |100 A
-|L7 100A branch circuit
+|L7 branch circuit
 |Large CNC, Part of Fiber Laser (2 x 20 A)
 |-
@@ Line 49: / Line 49: @@
 |Wood shop, South wall, west side
 |60 A
-|L5 60 A branch circuit
+|L5 branch circuit
 |Wood Shop, incl. Saw Stop Table Saw, Small CNC, Small Sanders
 |-
@@ Line 78: / Line 78: @@
 |L11
 |Ceramics Shop (South wall)
+|100 A
-|L10 ?? A branch circuit
+|L10 branch circuit
 |Ceramics
 |}

← Older revision		Revision as of 17:28, 18 January 2025
Line 1:		Line 1:
−	Asmbly's facility is composed of ~~three separate~~ units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service. Our meters and outdoor disconnects are on the south side of the building ~~around the corner from the laser exhausts~~.	+	Asmbly's facility is composed of five (out of six) units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service. Our meters and outdoor disconnects are on the south side of the building.

	* The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.		* The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.