Tethys - Revision history

Sid: Sid moved page Elegoo Saturn 3 Ultra to Tethys

2025-05-15T00:40:04Z

2025-05-14T23:14:11Z

2025-05-14T23:11:22Z

2025-04-12T02:20:54Z

Z height setting

2025-04-11T20:36:09Z

Adding z height note

2025-02-21T22:31:10Z

Cleaning up after failed prints

2025-02-21T22:28:55Z

Cleaning up after failed prints

2025-02-13T22:29:47Z

2024-11-27T23:44:08Z

Added Cleanup, BYOResin

2024-09-06T21:44:29Z

Included Post-processing reminder by the cleaning guide

@@ Line 44: / Line 44: @@
 |-
 |Printer Dimensions||305.9mm(L) * 273mm(W) * 562.5mm(H)
 |}

@@ Line 7: / Line 7: @@
 {| class="wikitable"
-|+Unnamed SLA Printer
+|+Tethys (Elegoo Saturn 3 Ultra)
 |-
 |Manufacturer||Elegoo

@@ Line 143: / Line 143: @@
 # On the touch screen, return to the previous menu, set "Z=0," and press "Confirm."
 # Manually raise the build plate.
-# Note from a Steward: Please be aware that at least some versions of CHITUBOX will attempt to auto correct an infrequent issue on build plate leveling by including in the slicing data a command to over shoot the the set zero that can lead to print fails by print over compression. After leveling, run a test print and then manually adjust the z height by the .1mm it is off by the calipers.
+# Note from a Steward: Please be aware that at least some versions of CHITUBOX will attempt to auto correct an infrequent issue on build plate leveling by including in the slicing data a command to over shoot the the set zero that can lead to print fails by print over compression. After leveling, run a test print and then manually adjust the z height by the .1mm it is off by the calipers. As of 4/11/2025 the proper z hieght post leveling needs to be set at .9 mm above level sheet.
 == Cleanup ==

@@ Line 143: / Line 143: @@
 # On the touch screen, return to the previous menu, set "Z=0," and press "Confirm."
 # Manually raise the build plate.
 == Cleanup ==

@@ Line 164: / Line 164: @@
 ==== Cleaning up after failed prints ====
-[[Resin Tank Cleanup]]
+If your print fails, particularly if some parts of the print don't adhere to the bed, it's likely you'll need to do a
 == Resources ==

← Older revision	Revision as of 00:40, 15 May 2025
(No difference)

@@ Line 82: / Line 82: @@
 == Materials ==
-Only resin purchased from Asmbly may be used in these printers.
+Asmbly makes basic resin available to members for printing. The pricing of resin is $0.10 per gram, or $0.11 per mL. You may also bring your own resin, in which case you should also bring a https://us.elegoo.com/products/metal-resin-tank-for-saturn-3-ultra.
+====Available Resin Materials====
-The pricing of resin is $0.10 per gram.
+You may purchase resin [https://asmbly.app.neoncrm.com/campaigns/resin-3d-printer-supplies here].
 ELEGOO ABS-like 3.0 Photopolymer Resin Grey
@@ Line 163: / Line 161: @@
 ==== Post-Processing ====
 All SLA prints must be rinsed thoroughly to remove uncured resin using the stationed solvents and the Form Wash. After rinsing, the prints must be placed in the Form Cure for post-curing to achieve their final properties and finish. Each step in the process is labeled by the washing station
 == Resources ==
@@ Line 173: / Line 174: @@
 ==== Common Problems ====
 If you are unsure, it is always best to contact a steward and fill out a [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform problem report]
 == Common Projects ==

@@ Line 160: / Line 160: @@
 * Check the condition of the release film before each printing, and observe whether the release film is loose, whether there are scratches or severe whitening on the surface, and if so, replace it in time. The release film is a vulnerable part, replace it at least once every 1-2 months, and increase the replacement frequency as the printing frequency increases.
 * Be careful when removing the printing platform to prevent damaging the LCD screen. The service life of the screen is about 2000+ hours and will decrease with increasing printing frequency. Do a good job of daily screen cleaning, and unplug the machine in time after printing. If there is a screen exposure problem or service life has seriously affected the print quality, please replace the screen in time.
 == Resources ==