Difference between revisions of "CR-10S"
From Asmbly Wiki
| Line 1: | Line 1: | ||
| + | {{Required|3D Printing}} | ||
| + | {{ToolPhoto|CR10.jpg}} | ||
| + | |||
The Creality CR-10S is a 3D printer at the space. | The Creality CR-10S is a 3D printer at the space. | ||
| + | Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10. | ||
| − | {{ | + | {{Infobox 3d printer |
| − | + | | Printer Name = Unknown Name (CR-10S) | |
| + | | Status = {{PrinterActive}} | ||
| + | | Manufacturer = Prusa | ||
| + | | Model = i3 MK3S+ | ||
| + | | Network Address = Unknown | ||
| + | | Nozzle Size (mm) = 0.4 | ||
| + | | Nozzle Type = Brass(?) | ||
| + | | Nozzle Count = 1 | ||
| + | | Filament Size (mm) = 1.75 | ||
| + | | Print Volume (mm) = 300 x 300 x 400 | ||
| + | | Max Bed Temperature (C) = 90(?) | ||
| + | | Max Nozzle Temperature (C) = 230(?) | ||
| + | | Max Print Speed (mm/s) = 60(?) | ||
| + | | Extruder Type = Bowden | ||
| + | }} | ||
== Resources == | == Resources == | ||
Revision as of 04:00, 27 June 2022
Members must complete the 3D Printing Class before using this tool
The Creality CR-10S is a 3D printer at the space. Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10.
| Status | Active |
| Video Feed | Unknown |
| Manufacturer | Prusa |
| Model | i3 MK3S+ |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 300 x 400mm |
| Max Bed Temperature | 90(?)C |
| Max Nozzle Temperature | 230(?)C |
| Max Print Speed | 60(?)mm/s |
| Extruder Type | Bowden |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please submit a problem report if maintenance is required.
