Difference between revisions of "Dixie-Narco 368 Vending Machine"
| Line 7: | Line 7: | ||
It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain. | It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain. | ||
| − | [[File:AsmblyDNCB368_ID.jpg|frame | + | [[File:AsmblyDNCB368_ID.jpg|frame,center|720px|Our ID plate]] |
| − | [[File:TypicalDNCB368_ID.jpg|frame | + | [[File:TypicalDNCB368_ID.jpg|frame,center|720px|Sample/typical ID plate]] |
Revision as of 19:21, 27 November 2022
Asmbly's soda machine is a vintage Dixie Narco 368 single-price vending machine. It's equipped with a CoinCo 3341-S changer and a $1 bill acceptor.
This machine is an '80s-era electromechanical vending machine so equipping it with a card reader would require prohibitively expensive rework -- it would be cheaper to replace the machine. Asmbly would be more than happy to accept donation of a modern multi-price vending machine with card reader if anyone were so inclined.
It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain.
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
