Difference between revisions of "Dixie-Narco 368 Vending Machine"
| Line 7: | Line 7: | ||
It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain. | It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain. | ||
| − | [[File:AsmblyDNCB368_ID.jpg| | + | Our ID Plate |
| − | [[File:TypicalDNCB368_ID.jpg| | + | [[File:AsmblyDNCB368_ID.jpg|center|720px|Our ID plate]] |
| + | |||
| + | Sample/Typical ID plate for this model | ||
| + | [[File:TypicalDNCB368_ID.jpg|center|720px|Sample/typical ID plate]] | ||
Revision as of 19:24, 27 November 2022
Asmbly's soda machine is a vintage Dixie Narco 368 single-price vending machine. It's equipped with a CoinCo 3341-S changer and a $1 bill acceptor.
This machine is an '80s-era electromechanical vending machine so equipping it with a card reader would require prohibitively expensive rework -- it would be cheaper to replace the machine. Asmbly would be more than happy to accept donation of a modern multi-price vending machine with card reader if anyone were so inclined.
It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain.
Our ID Plate
Sample/Typical ID plate for this model
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
