Difference between revisions of "Combo Heat Press Machine"

From Asmbly Wiki
(Initial draft)
 
 
Line 26: Line 26:
 
==Maintenance==
 
==Maintenance==
 
The information below is primarily for stewards.
 
The information below is primarily for stewards.
 +
 +
{{Owned}}
 +
[[Category:Textiles]]

Latest revision as of 22:15, 22 October 2024


Donated TOPDEEP Heat Press, specifically setup to be a Hat Press.

Safety

Universal Safety

  • Be aware of your surroundings, especially when handling large materials.
  • Do not approach anyone operating equipment. Stand patiently in their field of view.
  • Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.

Equipment-Specific Safety

Etiquette

Use Case

The Prusa MK3S+ are good printers to produce sma

Materials

Acceptable Materials

Material Limits

Consumables

You are responsible for providing your own materials.Operation

Controls

Cleanup

Universal Cleaning Guide

  • Return the equipment to neutral.
  • Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
  • Clear the floor of any tripping hazards, like power cords.
  • Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
  • Leave the shop 110% better than you found it.

Tool Specific Cleaning Guide

Resources

Troubleshooting

Common Problems

If you are unsure, it is always best to contact a steward and fill out a problem report

Maintenance

The information below is primarily for stewards.


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.