Difference between revisions of "Electrical Infrastructure"
From Asmbly Wiki
m |
m |
||
| Line 2: | Line 2: | ||
* The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop. | * The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop. | ||
| − | * The 302 service has a 200A fused disconnect which feeds panel L10 in Ceramics. L10 feeds L11 via a | + | * The 302 service has a 200A fused disconnect which feeds panel L10 in Ceramics. L10 feeds subpanel L11 via a 100 A branch circuit breaker. |
* The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4. L4 feeds subpanel L3 via a 100A branch circuit breaker. | * The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4. L4 feeds subpanel L3 via a 100A branch circuit breaker. | ||
| − | * The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakerss. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline1) and the other feeds subpanel L5. L5 feeds L6 via a 60 A branch circuit breaker. | + | * The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakerss. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline1) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker. |
* The 306 service has a 200A fused disconnect which feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker. | * The 306 service has a 200A fused disconnect which feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker. | ||
Revision as of 17:41, 18 January 2025
Asmbly's facility is composed of five (out of six) units of 9701 Dessau Road building 3, each of which is equipped with its own "light commercial" 200A 3-phase 120/208V service. Our meters and outdoor disconnects are on the south side of the building.
- The 301 service feeds an outside service panel with two 100 A breakers. One of these feeds subpanel L8 and the other subpanel L9, both in the new metal shop.
- The 302 service has a 200A fused disconnect which feeds panel L10 in Ceramics. L10 feeds subpanel L11 via a 100 A branch circuit breaker.
- The 303 service feeds an outside service panel with one 200A breaker. This feeds subpanel L4. L4 feeds subpanel L3 via a 100A branch circuit breaker.
- The 304 service has a 200A fused disconnect which feeds an outside service panel with two 100 A breakerss. One of these feeds subpanel L2 (via a switch disconnect SW, located on the south wall of the woodshop, east of the centerline1) and the other feeds subpanel L5. L5 feeds subpanel L6 via a 60 A branch circuit breaker.
- The 306 service has a 200A fused disconnect which feeds panel L7 in the multipurpose room. L7 feeds subpanel L8 via a 100A branch circuit breaker.
Restated in terms of panels:
| Panel | Location | Capacity | Supply | Areas & Machines Directly Powered |
|---|---|---|---|---|
| L1 | Wood shop, West wall | 100 A | L7 branch circuit | Large CNC, Part of Fiber Laser (2 x 20 A) |
| L2 | Wood shop, North wall | 100 A | 304 Service Panel (via SW1) | Metal Shop, Air Compressor |
| L3 | Wood shop, South wall, east side | 100 A | L4 100A branch circuit | Wood Shop, incl. Planer, Jointer, Drill Press, Router, Sander,
Bandsaws, Chop/Miter Saw, Wood Lathes; Electronics Room |
| L4 | Wood shop, South wall, east side | 200 A * | 303 Service Panel | AC/Heating Units, Additional Wood Shop Tools |
| L5 | Wood shop, South wall, west side | 100 A * | 304 Service Panel | AC/Heating Units, Wood Shop Main Dust Collector |
| L6 | Wood shop, South wall, west side | 60 A | L5 branch circuit | Wood Shop, incl. Saw Stop Table Saw, Small CNC, Small Sanders |
| L7 | Multipurpose Room | 200 A * | 306 Fused Disconnect | Laser Room, 3D Printing Room, Textiles, Multipurpose Room, Lobby |
| L8 | New Metal Shop (Northwest wall) | 100 A | 301 Service Panel | Metal Shop |
| L9 | New Metal Shop (Northwest wall) | 100 A | 301 Service Panel | NW Lobby, Studios, Lights, Hallways |
| L10 | Ceramics Shop (South wall) | 200 A * | 302 Fused Disconnect | Ceramics |
| L11 | Ceramics Shop (South wall) | 100 A | L10 branch circuit | Ceramics |
* Feeds another panel, limiting practical capacity.
