Difference between revisions of "Wish List"

From Asmbly Wiki
(Removed year)
 
(25 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
Asmbly is always interested in acquiring quality tools and machinery for use by its members.  This page includes a selection of our priorities for 2022.
+
Asmbly is always interested in acquiring quality tools and machinery for use by its members.  This page includes a selection of our priorities.
 +
 
 +
If you own one of these machines and would be interested in donating or hosting it at Asmbly for members to use, please email workshop@asmbly.org for more information.  As a rule, Asmbly accepts hosting or donation of working, ready-to-use equipment.  If you have a candidate machine that needs some attention before use, we may be able to arrange volunteer support for repairs prior to or concurrent with transfer to Asmbly.
  
−
If you own one of these machines and would be interested in donating or hosting it at Asmbly for members to use, please email workshop@asmbly.org for more information.
 
  
 
==Wood Shop==
 
==Wood Shop==
  
−
* Large oscillating edge sander: eg [https://www.grizzly.com/products/south-bend-6-x-108-vs-oscillating-edge-sander/sb1097 SB1097] or [https://www.felder-group.com/en-us/products/stroke-edge-sanders-c1956/edge-sanders-hs-950-p54694 HS950].  Our tiny benchtop edge sander isn't really useful for furniture-sized projects commonly made in our wood shop.
+
* A >20" helical-head planer: eg [https://lagunatools.com/classic/planers/px-22-10hp/ Laguna PX|22], [https://powermatic.com/planers/1791268 Powermatic 201HH], or [https://www.ironwoodmachinery.com/products/ironwood-p600-planer Ironwood P600].  We had a nice jointer upgrade last year; one of these days we'll want to upgrade our planer to a similar league.
−
 
 
−
* Tilting spindle sander: eg [https://lagunatools.com/classic/sanders/ss-24/ Laguna SS-24] or [https://deltamachinery.com/products/sanders/31-484 Delta 31-484].  Our benchtop spindle sander isn't really useful for furniture-sized projects, and a tilting spindle allows sanding bevels without the brute strength sometimes required to maneuver a large workpiece on a tilting table.
 
−
 
 
−
* Large combination sander: eg [https://www.grizzly.com/products/shop-fox-6-x-48-belt-12-disc-combo-sander/w1712 Shop Fox W1712] or [https://powermatic.com/sanders/combination-disc-belt-sanders/1791292k Powermatic 31A].  Replacing our desktop sanders with a stationary unit would improve capacity and dust collection.
 
  
−
* Two more [[Laguna_Revo_12_16_Lathe|Laguna Revo 12|16]] variable-speed midi lathes.  Our woodturning classes are always popular and expanding our lathe fleet will allow us to accommodate more students.
+
* A large tilting-head scroll saw: eg [https://www.cpooutlets.com/factory-reconditioned-excalibur-ex-21crb-21-in.-tilting-head-scroll-saw-with-foot-switch/exzrex-21crb.html Excalibur 21].  We have a couple small consumer-grade scroll saws but it can be hard to control a workpiece on a tilted table, and flat they're mostly redundant to the big lasers.  A tilting-head saw can make cuts that would be very difficult otherwise.  (We'll need two or more matching machines if we get a scroll saw class going.)
  
−
* A large tilting-head scroll saw: eg [https://www.cpooutlets.com/factory-reconditioned-excalibur-ex-21crb-21-in.-tilting-head-scroll-saw-with-foot-switch/exzrex-21crb.html Excalibur 21].  We have a couple small consumer-grade scroll saws but it can be hard to control a workpiece on a tilted table, and flat they're mostly redundant to the big lasers.  A tilting-head saw can make cuts that would be very difficult otherwise.
+
* Two more [[Laguna_Revo_12_16_Lathes|Laguna Revo 12|16]] variable-speed midi lathes.  Our woodturning classes are always popular and expanding our lathe fleet will allow us to accommodate more students.
  
 
==Metal Shop==
 
==Metal Shop==
  
−
* A proper fabrication table: eg [https://fireballtool.com/fireball-table-102-x-54/ Fireball Table] or, more realistically, one or more [https://www.langmuirsystems.com/arcflat Arcflat Tables]. We currently have a steel fabrication table that's not particularly flat.  A machined fabrication table with convenient fixturing would be a huge help to our welding folks.
+
* A metal-cutting handheld circular saw: eg [https://www.homedepot.com/p/Milwaukee-15-Amp-8-in-Metal-Cutting-Circular-Saw-6370-21/202101590 Milwaukee] or [https://www.homedepot.com/p/Makita-13-Amp-7-1-4-in-Corded-Metal-Cutting-Saw-with-Dust-Collector-and-36T-CERMET-Blade-4131/203231407 Makita].  These are really useful for making clean cuts in plate without breaking out the fiber laser.
  
−
* 3-in-1 sheet metal machine at least 36" wide: eg [https://www.baileigh.com/shear-brake-roll-sbr-5216 Baileigh SBR-5216].  We only have a benchtop brake now; basic sheet metal tooling would be useful to a lot of members.
+
* A portable bandsaw: eg [https://www.homedepot.com/p/Milwaukee-11-Amp-Deep-Cut-Band-Saw-with-Hard-Case-6232-21/203261029 Milwaukee] or [https://www.homedepot.com/p/WEN-10-Amp-5-Inch-Variable-Speed-Handheld-Portable-Band-Saw-for-Metal-94396/307328177 Wen].  Comes in handy for random fabrication work, and is a lot easier to control than a sawzall.
  
−
* A second [https://www.weldingsuppliesfromioc.com/miller-multimatic-220-ac-dc-multiprocess-welder MultiMatic 220].  We currently have one MM220 and one MIG welder.  Replacing the old MIG with a second 220 would help with TIG classes and allow sharing of consumables.
+
* A big pedestal grinder with dust collection: eg [https://jettools.com/metalworking/grinding-finishing/bench-grinders-buffers/578012 Jet IBG-12] with [https://jettools.com/414800 stand].  Our bench grinders are all smallish and messy.  An upgrade would solve both problems.
  
−
* Manual Vertical Mill, 2+ hp, X&Y power feed and 3-axis DRO greatly preferred: eg Bridgeport.  Our manual mill *works* but it's not amazing.  We're not inclined to invest a bunch of money on repairs and improvements.  We're relatively open to options here; we'd consider a contemporary mill with the bells and whistles or great vintage iron that could be updated with modern accessories.
+
* Mobile gantry crane, at least 1000lbs capacity.  Electric hoist and lifting magnet definitely a plus but perhaps not strictly necessary.  This would come in handy for a bunch of applications, but will be needed soon for a single operator to load material in the fiber laser.
  
−
* Metal Lathe, geared head, at least 14x40. Same situation as our manual mill - our lathe *works* but it's not amazing, and we're not inclined to invest much money in it.  We're likewise open to either modern or vintage options, so long as it can cut both Imperial and metric threads.
+
* A sheet metal corner notcher: eg [https://www.trick-tools.com/JET_HN_16N_Corner_Notcher_756016_1074 Jet HN-16N].  We'd definitely want a benchtop model that can be stored on a shelf or under a bench when not in use.
  
−
* Drill press, geared head or variable-speed, with coolant system: eg [https://www.baileigh.com/variable-speed-drill-press-dp-1200vs Baileigh DP-1200VS]  Enthusiastic members tend to burn up drill bits in the metal shop.  Easy speed changes and coolant support will help cutter life, especially when juggling multiple users.
+
<!-- Probably a bunch of other stuff can go here.  Surface Grinder? Ironworker? D-Bit Grinder? -->
−
 
 
−
* Mobile gantry crane, at least 1000lbs capacity. Electric hoist and lifting magnet definitely a plus but perhaps not strictly necessary. This would come in handy for a bunch of applications, but will be needed soon for a single operator to load material in the fiber laser.
 
  
 
== Electronics Lab ==
 
== Electronics Lab ==
 
We are currently renovating our electronics lab to bring our outdated equipment up-to-date.  Our full wish list for this renovation can be seen on Digi-Key [https://www.digikey.com/short/5pdqdn47 here] and [https://www.digikey.com/short/r4r2qbjr here].  Below are a few of the larger items we are looking for.
 
We are currently renovating our electronics lab to bring our outdated equipment up-to-date.  Our full wish list for this renovation can be seen on Digi-Key [https://www.digikey.com/short/5pdqdn47 here] and [https://www.digikey.com/short/r4r2qbjr here].  Below are a few of the larger items we are looking for.
  
−
* Oscilloscope 100 MHz digital bench, eg [https://www.digikey.com/en/products/detail/rigol-technologies/DS1104Z-PLUS/10468140 Rigol DS1104Z Plus].
+
* Two oscilloscopes, 100+ MHz, 4ch digital bench, eg [https://www.rigolna.com/products/digital-oscilloscopes/MSO5000/ Rigol MSO5104 Plus].
−
* Power supply 30V 5A with several outputs, eg [https://www.digikey.com/en/products/detail/b-k-precision/1671A/2094163 B&K Precision 1671A].
+
* Two or more good basic handheld RMS multimeters, eg [https://www.amazon.com/Fluke-115-Compact-True-RMS-Multimeter/dp/B000OCFFMW Fluke 115]
−
* Modern soldering stations with fume extraction, eg [https://www.digikey.com/en/products/detail/apex-tool-group/WE1010NA/8017918 Weller soldering iron], [https://www.digikey.com/en/products/detail/sra-soldering-products/AO486/10709971 fume extractor], [https://www.digikey.com/en/products/detail/bertech/2059S-2-5X3BKT/11681071 soldering mat].
+
 
−
* Modern heat gun with variable airflow and temperature control, eg [https://www.digikey.com/en/products/detail/sra-soldering-products/AO8032A/10709823 heat gun].
+
* Two or more power supplies 30V 5A with several outputs, eg [https://siglentna.com/product/spd3303x/ Siglent SPD3303X].
 +
* Benchtop LCR meter, eg [https://www.tequipment.net/Instek/LCR-6100/LCR-Meters/ Instek LCR-6100]
 +
* Another [http://www.thermaltronics.com/tmt-9000s.php Thermaltronics TMT-9000] and supplies
  
 
We are not currently accepting donations for electronics consumables such as capacitors, resistors, transistors, ICs, etc.
 
We are not currently accepting donations for electronics consumables such as capacitors, resistors, transistors, ICs, etc.
  
−
== Autobay ==
+
== Textiles ==  
−
* Portable hydraulic lift, 6000lbs capacity or greater: eg [https://www.bendpak.com/car-lifts/portable-car-lifts/bl-7000slx/ QuickJack].  We'd like a safer and more convenient lifting option than jack stands, but we can't afford the floor space for a fixed lift setup.  Whatever we get must be easy to move and store when not in use.  Difficulty: must also be ANSI/CE safety rated with mechanical interlocks to protect against pressure loss.
+
Our new textiles area is off to a great start, but there's a lot of specialty equipment that we'd love to offer our community.
 +
* Two more Janone MOD-19s for introductory sewing classes
 +
* A dressmaker's mannequin
 +
* A steamer
 +
* A self-threading serger, eg [https://jukiquilting.com/products/mo-2000qvp.html Juki MO-2000]
 +
* A longarm quilting machine with frame, eg [https://jukiquilting.com/quilting-machines/miyabi-j350qvp.html Juki j350]
 +
* A vinyl cutter with modern software capable of contour cutting and reading registration marks, like this [https://uscutter.com/LaserPoint-3-Vinyl-Cutter-ARMS-Contour-Cut/ 34" LaserPoint 3 ARMS Contour Cut Vinyl Cutter]
  
−
<!-- Probably a bunch of other stuff can go here. Surface Grinder?  Sheet metal brake?  Ironworker? -->
+
== General Operations ==
 +
There are a few bits and bobs we need for day-to-day operations of the space
 +
* K-Cups of any variety will always get used
 +
* A color laser MFP (eg [https://www.amazon.com/HP-LaserJet-Enterprise-M480f-Multifunction/dp/B08SQQVKXP HP M480f] or [https://www.amazon.com/dp/B07QBR85G6 Canon MF743Cdw]) would also be put to good use.  We print a lot of class materials and having color would be helpful.
  
−
As a rule, Asmbly accepts hosting or donation of working, ready-to-use equipment.  If you have a candidate machine that needs some attention before use, we may be able to arrange volunteer support for repairs prior to or concurrent with transfer to Asmbly. 
 
  
 
[[Category:Operations]]
 
[[Category:Operations]]

Latest revision as of 21:23, 5 November 2023

Asmbly is always interested in acquiring quality tools and machinery for use by its members. This page includes a selection of our priorities.

If you own one of these machines and would be interested in donating or hosting it at Asmbly for members to use, please email workshop@asmbly.org for more information. As a rule, Asmbly accepts hosting or donation of working, ready-to-use equipment. If you have a candidate machine that needs some attention before use, we may be able to arrange volunteer support for repairs prior to or concurrent with transfer to Asmbly.


Wood Shop

  • A large tilting-head scroll saw: eg Excalibur 21. We have a couple small consumer-grade scroll saws but it can be hard to control a workpiece on a tilted table, and flat they're mostly redundant to the big lasers. A tilting-head saw can make cuts that would be very difficult otherwise. (We'll need two or more matching machines if we get a scroll saw class going.)
  • Two more Laguna Revo 12|16 variable-speed midi lathes. Our woodturning classes are always popular and expanding our lathe fleet will allow us to accommodate more students.

Metal Shop

  • A metal-cutting handheld circular saw: eg Milwaukee or Makita. These are really useful for making clean cuts in plate without breaking out the fiber laser.
  • A portable bandsaw: eg Milwaukee or Wen. Comes in handy for random fabrication work, and is a lot easier to control than a sawzall.
  • A big pedestal grinder with dust collection: eg Jet IBG-12 with stand. Our bench grinders are all smallish and messy. An upgrade would solve both problems.
  • Mobile gantry crane, at least 1000lbs capacity. Electric hoist and lifting magnet definitely a plus but perhaps not strictly necessary. This would come in handy for a bunch of applications, but will be needed soon for a single operator to load material in the fiber laser.
  • A sheet metal corner notcher: eg Jet HN-16N. We'd definitely want a benchtop model that can be stored on a shelf or under a bench when not in use.


Electronics Lab

We are currently renovating our electronics lab to bring our outdated equipment up-to-date. Our full wish list for this renovation can be seen on Digi-Key here and here. Below are a few of the larger items we are looking for.

We are not currently accepting donations for electronics consumables such as capacitors, resistors, transistors, ICs, etc.

Textiles

Our new textiles area is off to a great start, but there's a lot of specialty equipment that we'd love to offer our community.

  • Two more Janone MOD-19s for introductory sewing classes
  • A dressmaker's mannequin
  • A steamer
  • A self-threading serger, eg Juki MO-2000
  • A longarm quilting machine with frame, eg Juki j350
  • A vinyl cutter with modern software capable of contour cutting and reading registration marks, like this 34" LaserPoint 3 ARMS Contour Cut Vinyl Cutter

General Operations

There are a few bits and bobs we need for day-to-day operations of the space

  • K-Cups of any variety will always get used
  • A color laser MFP (eg HP M480f or Canon MF743Cdw) would also be put to good use. We print a lot of class materials and having color would be helpful.
Retrieved from "https://wiki.asmbly.org/index.php?title=Wish_List&oldid=2676"