Difference between revisions of "Elegoo Mars 2 Pro"
From Asmbly Wiki
(Included safety and materials section for resin.) |
(Additions to the safety and materials section.) |
||
| Line 1: | Line 1: | ||
| − | Asmbly owns the ELEGOO Mars 2P | + | Asmbly owns the ELEGOO Mars 2P SLA printer. |
{{Required|Intro to Resin 3D Printing}} | {{Required|Intro to Resin 3D Printing}} | ||
| + | {{ExtraCost}} | ||
[[File:Elegoo Mars 2 Pro.png|alt=Photo of the Elegoo Mars 2 Pro|center|frameless]] | [[File:Elegoo Mars 2 Pro.png|alt=Photo of the Elegoo Mars 2 Pro|center|frameless]] | ||
| Line 12: | Line 13: | ||
|Model||Elegoo Mars 2 Pro | |Model||Elegoo Mars 2 Pro | ||
|- | |- | ||
| − | |Technology||UV Photocuring | + | | Technology||UV Photocuring |
|- | |- | ||
| − | |Layer Thickness||0.01 - 0.2mm | + | |Layer Thickness ||0.01 - 0.2mm |
|- | |- | ||
|Printing Speed||30 - 50mm/h | |Printing Speed||30 - 50mm/h | ||
| Line 22: | Line 23: | ||
|XY Resolution||0.05mm (1620 * 2560) | |XY Resolution||0.05mm (1620 * 2560) | ||
|- | |- | ||
| − | |Build Volume||129mm(L) * 80mm(W) * 160mm(H) | + | |Build Volume|| 129mm(L) * 80mm(W) * 160mm(H) |
|- | |- | ||
| − | |Light Source||UV Integrated Light (Wavelength 405 nm) | + | |Light Source|| UV Integrated Light (Wavelength 405 nm) |
|- | |- | ||
| − | |Languages||Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese | + | | Languages||Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese |
|- | |- | ||
|Connectivity||USB Interface & Wi-Fi | |Connectivity||USB Interface & Wi-Fi | ||
| Line 39: | Line 40: | ||
|} | |} | ||
| − | == Safety == | + | ==Safety== |
{{UniversalSafety}} | {{UniversalSafety}} | ||
| − | ==== Equipment-Specific Safety ==== | + | ====Equipment-Specific Safety==== |
| − | |||
| − | + | * Keep the Mars 2 Pro 3D Printer and its accessories out of the reach of children. | |
| + | * Fill the resin tank no less than 1/3 of its volume, but do not exceed the MAX line position. | ||
| + | * Place the printer in a dry environment and protect it from rain and moisture. | ||
| + | * If you run into an emergency during use, please turn off the power supply of the 3D printer first. | ||
| + | * Use the printer indoors and avoid direct sunlight and a dusty environment. | ||
| + | * Use 95% ethyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin. | ||
| + | * If the printing fails, you need to clean the excess cured resin in the resin tank and change the resin, otherwise, it may cause damage to the printer. | ||
| + | * When operating the 3D printer, please wear a mask and gloves to avoid direct skin contact with the photopolymer resin. | ||
| + | * If the release film in the resin tank is whitened, scratched, or has no elasticity, the printing failure rate is high, please replace the release film in time. | ||
| + | * Be careful when removing models with sharp edges from the build platform. | ||
| + | * If you have any problems with the printer, please [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform report] them to Asmbly via QR code. | ||
| − | ==== Etiquette | + | ====Etiquette==== |
| − | + | The 3D printers do not have a daily limit on booking time, but the time spent with the printers should include not only the print time, but also the additional time needed for pre-print and post-print tasks. Please incorporate this extra time when booking the printers. | |
| − | + | ====Resin Safety==== | |
| − | + | *Wear gloves and mask when using. | |
| + | *Keep away from children, dust and direct sunlight. | ||
| + | *May cause an allergic skin reaction. If skin contact occurs, wash thoroughly with plenty of soap and water. | ||
| + | *Causes serious eye irritation. In case of eye contact, use the emergency eye flush bottles located by the sink or rinse eyes with water for 20 minutes. | ||
| + | *Avoid breathing vapors. | ||
| − | + | ==Use Case== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == Use Case | ||
Description of what the tool does and when or why to use it | Description of what the tool does and when or why to use it | ||
Asmbly use: e.g. Skedda required, or part of an area. | Asmbly use: e.g. Skedda required, or part of an area. | ||
| − | == Materials == | + | ==Materials== |
Only resin purchased from Asmbly may be used in these printers. | Only resin purchased from Asmbly may be used in these printers. | ||
| − | The pricing of | + | The pricing of resin is $0.10 per gram. |
| − | You may purchase resin here. | + | You may purchase resin [https://asmbly.app.neoncrm.com/campaigns/resin-3d-printer-supplies here]. |
| − | ==== Available Resin Materials ==== | + | ====Available Resin Materials==== |
ELEGOO ABS-like 3.0 Photopolymer Resin Grey | ELEGOO ABS-like 3.0 Photopolymer Resin Grey | ||
| Line 82: | Line 90: | ||
Formlabs Photopolymer Resin Clear | Formlabs Photopolymer Resin Clear | ||
| − | == Operation (pictures encouraged) == | + | ==Operation (pictures encouraged) == |
| − | ==== Feeds and Speeds - if appropriate ==== | + | ==== Feeds and Speeds - if appropriate==== |
| − | ==== Controls ==== | + | ====Controls==== |
| − | ==== Settings and Adjustments ==== | + | ====Settings and Adjustments ==== |
| − | ==== Leveling the Bed ==== | + | ====Leveling the Bed==== |
To level the bed, follow these steps: | To level the bed, follow these steps: | ||
| − | # Press "Tool" and the "Manual" on the touchscreen to enter the leveling interface. | + | #Press "Tool" and the "Manual" on the touchscreen to enter the leveling interface. |
| − | # Place an A4 sheet of paper on the LCD screen, ensuring both the screen and the build plate are clean. | + | #Place an A4 sheet of paper on the LCD screen, ensuring both the screen and the build plate are clean. |
| − | # Loosen the screws securing the build plate. | + | #Loosen the screws securing the build plate. |
| − | # Tap the home icon to start the Z=0 process. | + | #Tap the home icon to start the Z=0 process. |
| − | # Once Z=0 is set, align the plate to avoid it touching the vat incorrectly. | + | #Once Z=0 is set, align the plate to avoid it touching the vat incorrectly. |
| − | # Tighten the two screws to level the plate. There should be some resistance when pulling the paper. If there is no resistance, readjust the screws to level the plate. If there is too much resistance, lift the plate and reset Z=0 for this position. | + | #Tighten the two screws to level the plate. There should be some resistance when pulling the paper. If there is no resistance, readjust the screws to level the plate. If there is too much resistance, lift the plate and reset Z=0 for this position. |
| − | ==== Tool Use ==== | + | ====Tool Use==== |
| − | == Cleanup == | + | ==Cleanup == |
{{UniversalCleaning}} | {{UniversalCleaning}} | ||
| Line 108: | Line 116: | ||
==== Tool Specific Cleaning Guide ==== | ==== Tool Specific Cleaning Guide ==== | ||
| − | * What to clean | + | *What to clean |
| − | * How to clean | + | *How to clean |
| − | * Where to dispose of waste | + | *Where to dispose of waste |
Example for Miter Saw: | Example for Miter Saw: | ||
| − | # Brush off top surface | + | #Brush off top surface |
| − | # Brush around machine | + | #Brush around machine |
| − | # Clean infeed and outfeed tables | + | #Clean infeed and outfeed tables |
| − | # Sweep floor | + | #Sweep floor |
| − | # Wall vacuum hose works well | + | #Wall vacuum hose works well |
| − | == Resources == | + | ==Resources== |
| − | ==== Manual ==== | + | ====Manual==== |
[https://myosuploads3.banggood.com/products/20210303/20210303043114ELEGOOMars2PROLCDPhotocuring3DPrinterUserManualVersion20210224.pdf ELEGOO Mars 2 Pro] | [https://myosuploads3.banggood.com/products/20210303/20210303043114ELEGOOMars2PROLCDPhotocuring3DPrinterUserManualVersion20210224.pdf ELEGOO Mars 2 Pro] | ||
| − | ==== Discourse Links ==== | + | ====Discourse Links==== |
| − | ==== SIG Information (if relevant) ==== | + | ====SIG Information (if relevant)==== |
| − | ==== External Resources ==== | + | ====External Resources==== |
| − | == Troubleshooting == | + | ==Troubleshooting== |
| − | ==== Common Problems ==== | + | ====Common Problems==== |
Detail what the problem is and how to fix it | Detail what the problem is and how to fix it | ||
If you are unsure, it is always best to contact a steward and fill out a [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform problem report] | If you are unsure, it is always best to contact a steward and fill out a [https://docs.google.com/forms/d/e/1FAIpQLSfBhIcxwJPpBbuTVlxZ6-hSfNduEM5kkT0e4JP_uxGe9Ar75Q/viewform problem report] | ||
| − | == Common Projects == | + | ==Common Projects== |
Revision as of 02:09, 6 September 2024
Asmbly owns the ELEGOO Mars 2P SLA printer.
Members must complete the Intro to Resin 3D Printing Class before using this tool
$ There is an extra charge to use this tool $
| Manufacturer | Elegoo |
| Model | Elegoo Mars 2 Pro |
| Technology | UV Photocuring |
| Layer Thickness | 0.01 - 0.2mm |
| Printing Speed | 30 - 50mm/h |
| Z Axis Accuracy | 0.00125mm |
| XY Resolution | 0.05mm (1620 * 2560) |
| Build Volume | 129mm(L) * 80mm(W) * 160mm(H) |
| Light Source | UV Integrated Light (Wavelength 405 nm) |
| Languages | Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese |
| Connectivity | USB Interface & Wi-Fi |
| Weight | 6.2kg |
| Operation | 3.5-inch Capacitive Touch Screen |
| Power Requirements | 100-240V 50/60Hz |
| Printer Dimensions | 20cm(L) * 20cm(W) * 41cm(H) |
Safety
Universal Safety
- Be aware of your surroundings, especially when handling large materials.
- Do not approach anyone operating equipment. Stand patiently in their field of view.
- Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.
Equipment-Specific Safety
- Keep the Mars 2 Pro 3D Printer and its accessories out of the reach of children.
- Fill the resin tank no less than 1/3 of its volume, but do not exceed the MAX line position.
- Place the printer in a dry environment and protect it from rain and moisture.
- If you run into an emergency during use, please turn off the power supply of the 3D printer first.
- Use the printer indoors and avoid direct sunlight and a dusty environment.
- Use 95% ethyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin.
- If the printing fails, you need to clean the excess cured resin in the resin tank and change the resin, otherwise, it may cause damage to the printer.
- When operating the 3D printer, please wear a mask and gloves to avoid direct skin contact with the photopolymer resin.
- If the release film in the resin tank is whitened, scratched, or has no elasticity, the printing failure rate is high, please replace the release film in time.
- Be careful when removing models with sharp edges from the build platform.
- If you have any problems with the printer, please report them to Asmbly via QR code.
Etiquette
The 3D printers do not have a daily limit on booking time, but the time spent with the printers should include not only the print time, but also the additional time needed for pre-print and post-print tasks. Please incorporate this extra time when booking the printers.
Resin Safety
- Wear gloves and mask when using.
- Keep away from children, dust and direct sunlight.
- May cause an allergic skin reaction. If skin contact occurs, wash thoroughly with plenty of soap and water.
- Causes serious eye irritation. In case of eye contact, use the emergency eye flush bottles located by the sink or rinse eyes with water for 20 minutes.
- Avoid breathing vapors.
Use Case
Description of what the tool does and when or why to use it
Asmbly use: e.g. Skedda required, or part of an area.
Materials
Only resin purchased from Asmbly may be used in these printers.
The pricing of resin is $0.10 per gram.
You may purchase resin here.
Available Resin Materials
ELEGOO ABS-like 3.0 Photopolymer Resin Grey
Formlabs Photopolymer Resin Grey
Formlabs Photopolymer Resin Rigid 4000
Formlabs Photopolymer Resin Clear
Operation (pictures encouraged)
Feeds and Speeds - if appropriate
Controls
Settings and Adjustments
Leveling the Bed
To level the bed, follow these steps:
- Press "Tool" and the "Manual" on the touchscreen to enter the leveling interface.
- Place an A4 sheet of paper on the LCD screen, ensuring both the screen and the build plate are clean.
- Loosen the screws securing the build plate.
- Tap the home icon to start the Z=0 process.
- Once Z=0 is set, align the plate to avoid it touching the vat incorrectly.
- Tighten the two screws to level the plate. There should be some resistance when pulling the paper. If there is no resistance, readjust the screws to level the plate. If there is too much resistance, lift the plate and reset Z=0 for this position.
Tool Use
Cleanup
Universal Cleaning Guide
- Return the equipment to neutral.
- Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
- Clear the floor of any tripping hazards, like power cords.
- Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
- Leave the shop 110% better than you found it.
Tool Specific Cleaning Guide
- What to clean
- How to clean
- Where to dispose of waste
Example for Miter Saw:
- Brush off top surface
- Brush around machine
- Clean infeed and outfeed tables
- Sweep floor
- Wall vacuum hose works well
Resources
Manual
Discourse Links
SIG Information (if relevant)
External Resources
Troubleshooting
Common Problems
Detail what the problem is and how to fix it
If you are unsure, it is always best to contact a steward and fill out a problem report
