Difference between revisions of "Flashforge Creator Pro"

Revision as of 03:56, 28 June 2022

Members must complete the 3D Printing Class before using this tool

The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.

This tool is owned by Russell Miller and hosted at Asmbly for members to use. Please contact the workshop committee if maintenance is required.

@@ Line 2: / Line 2: @@
 {{ToolPhoto|Flashforge.png}}
-The Flashforge Creator 2 Pro is a fully enclosed 3D Printer with independent dual extruders (IDEX). The IDEX setup uniquely allows this printer to extrude both nozzles at the same time in the following modes:
+The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.
-* Mirror Mode - Two objects horizontally mirrored
-* Duplicate Mode - Two objects identical in orientation
-* Multimaterial Mode - Print one object using multiple materials
-* Soluble Support Mode - Print one object using one main material, and support material that washes away with a liquid
 {{Infobox 3d printer
-| Printer Name = Unknown Name (Creator 2 Pro)
+| Printer Name = Unknown Name (Creator Pro)
 | Status = {{PrinterInactive}}
 | Manufacturer = Flashforge
-| Model = Creator 2 Pro
+| Model = Creator Pro
 | Network Address = Unknown
 | Nozzle Size (mm) = 0.4
 | Nozzle Type = Brass(?)
-| Nozzle Count = 2 (IDEX)
+| Nozzle Count = 2
 | Filament Size (mm) = 1.75
-| Print Volume (mm) = 200 x 148 x 150
+| Print Volume (mm) = ?
-| Max Bed Temperature (C) = 120(?)
+| Max Bed Temperature (C) = ?
-| Max Nozzle Temperature (C) = 240(?)
+| Max Nozzle Temperature (C) = ?
-| Max Print Speed (mm/s) = 100(?)
+| Max Print Speed (mm/s) = ?
 | Extruder Type = Direct
 }}
 == Resources ==
-* [[Media:Creator2Pro_User_Manual.pdf|User Manual]]
+* [[Media:CreatorPro_User_Manual.pdf|User Manual]]
 {{Hosted|Russell Miller}}
 [[Category:3D Printing]]