Difference between revisions of "Form 2"
| Line 1: | Line 1: | ||
| − | |||
Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly. We also have Form Wash and Form Cure post-processing equipment. Only resin purchased from Asmbly may be used in these printers. | Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly. We also have Form Wash and Form Cure post-processing equipment. Only resin purchased from Asmbly may be used in these printers. | ||
Revision as of 00:23, 26 August 2023
Asmbly has two Formlabs Form 2 desktop SLA printers: one hosted, and one owned by Asmbly. We also have Form Wash and Form Cure post-processing equipment. Only resin purchased from Asmbly may be used in these printers.
Members must complete the Intro to Resin 3D Printing Class before using this tool
$ There is an extra charge to use this tool $
Maintenance
After a failed print, it may be helpful to print a few layers of this "cleaning mesh", then remove it, to pull off residue from the previous job. Formlabs has a help page for this for the Form3 printer, but the official mesh doesn't seem to be available.
File:Form2-cleaning-mesh-hex.stl
Resources
Maintenance
This tool is owned by James Manley and hosted at Asmbly for members to use. Please submit a problem report if maintenance is required.
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please submit a problem report if maintenance is required.
