Difference between revisions of "Elegoo Mars 2 Pro"

From Asmbly Wiki
(Included steps for leveling the bed.)
(Included safety and materials section for resin.)
Line 52: Line 52:
  
 
If you are going to be spending a lot of time on the miter saw, write "miter saw" in the optional notes of your Skedda booking so other woodshop users will know.  
 
If you are going to be spending a lot of time on the miter saw, write "miter saw" in the optional notes of your Skedda booking so other woodshop users will know.  
 +
 +
==== Resin Safety ====
 +
 +
* Wear gloves and mask when using.
 +
* Keep away from children, dust and direct sunlight.
 +
* May cause an allergic skin reaction. If skin contact occurs, wash thoroughly with plenty of soap and water.
 +
* Causes serious eye irritation. In case of eye contact, use the emergency eye flush bottles located by the sink or rinse eyes with water for 20 minutes.
 +
* Avoid breathing vapors.
  
 
== Use Case  ==
 
== Use Case  ==
Line 59: Line 67:
  
 
== Materials ==
 
== Materials ==
 +
Only resin purchased from Asmbly may be used in these printers.
  
==== Acceptable Materials ====
+
The pricing of ABS like resin and Standar resin is $0.10 per gram.
List of materials allowed or not allowed (whichever is easiest) on this tool
 
 
 
e.g. no metal, no lubricants, no wet glue, no chlorinated materials
 
 
 
Required pre-processing (e.g. pre-jointed / planed lumber before table saw)
 
  
==== Material Limits ====
+
You may purchase resin here.
Table of min max dimensions / Material limits
 
  
==== Consumables ====
+
==== Available Resin Materials ====
Shop provided consumables and where to find them.
+
ELEGOO ABS-like 3.0 Photopolymer Resin Grey
  
e.g. bulk lubricate or cleaning supplies
+
Formlabs Photopolymer Resin Grey
  
What consumables to bring from home
+
Formlabs Photopolymer Resin Rigid 4000
  
e.g. sand paper, glue, specialty precision tools or materials
+
Formlabs Photopolymer Resin Clear
  
 
== Operation (pictures encouraged) ==
 
== Operation (pictures encouraged) ==

Revision as of 01:44, 6 September 2024

Asmbly owns the ELEGOO Mars 2P, a cure post-processing equipment.


ClassWarningIcon.png Members must complete the Intro to Resin 3D Printing Class before using this tool



Photo of the Elegoo Mars 2 Pro
Unnamed Cure Post-Processor
Manufacturer Elegoo
Model Elegoo Mars 2 Pro
Technology UV Photocuring
Layer Thickness 0.01 - 0.2mm
Printing Speed 30 - 50mm/h
Z Axis Accuracy 0.00125mm
XY Resolution 0.05mm (1620 * 2560)
Build Volume 129mm(L) * 80mm(W) * 160mm(H)
Light Source UV Integrated Light (Wavelength 405 nm)
Languages Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese
Connectivity USB Interface & Wi-Fi
Weight 6.2kg
Operation 3.5-inch Capacitive Touch Screen
Power Requirements 100-240V 50/60Hz
Printer Dimensions 20cm(L) * 20cm(W) * 41cm(H)

Safety

Universal Safety

  • Be aware of your surroundings, especially when handling large materials.
  • Do not approach anyone operating equipment. Stand patiently in their field of view.
  • Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.

Equipment-Specific Safety

<CLASS> is required to use this tool.

<PPE> are required to use this tool.

Etiquette (if relevant)

Example:

If you are going to be spending a lot of time on the miter saw, write "miter saw" in the optional notes of your Skedda booking so other woodshop users will know.

Resin Safety

  • Wear gloves and mask when using.
  • Keep away from children, dust and direct sunlight.
  • May cause an allergic skin reaction. If skin contact occurs, wash thoroughly with plenty of soap and water.
  • Causes serious eye irritation. In case of eye contact, use the emergency eye flush bottles located by the sink or rinse eyes with water for 20 minutes.
  • Avoid breathing vapors.

Use Case

Description of what the tool does and when or why to use it

Asmbly use: e.g. Skedda required, or part of an area.

Materials

Only resin purchased from Asmbly may be used in these printers.

The pricing of ABS like resin and Standar resin is $0.10 per gram.

You may purchase resin here.

Available Resin Materials

ELEGOO ABS-like 3.0 Photopolymer Resin Grey

Formlabs Photopolymer Resin Grey

Formlabs Photopolymer Resin Rigid 4000

Formlabs Photopolymer Resin Clear

Operation (pictures encouraged)

Feeds and Speeds - if appropriate

Controls

Settings and Adjustments

Leveling the Bed

To level the bed, follow these steps:

  1. Press "Tool" and the "Manual" on the touchscreen to enter the leveling interface.
  2. Place an A4 sheet of paper on the LCD screen, ensuring both the screen and the build plate are clean.
  3. Loosen the screws securing the build plate.
  4. Tap the home icon to start the Z=0 process.
  5. Once Z=0 is set, align the plate to avoid it touching the vat incorrectly.
  6. Tighten the two screws to level the plate. There should be some resistance when pulling the paper. If there is no resistance, readjust the screws to level the plate. If there is too much resistance, lift the plate and reset Z=0 for this position.

Tool Use

Cleanup

Universal Cleaning Guide

  • Return the equipment to neutral.
  • Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
  • Clear the floor of any tripping hazards, like power cords.
  • Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
  • Leave the shop 110% better than you found it.

Tool Specific Cleaning Guide

  • What to clean
  • How to clean
  • Where to dispose of waste

Example for Miter Saw:

  1. Brush off top surface
  2. Brush around machine
  3. Clean infeed and outfeed tables
  4. Sweep floor
  5. Wall vacuum hose works well

Resources

Manual

ELEGOO Mars 2 Pro

Discourse Links

SIG Information (if relevant)

External Resources

Troubleshooting

Common Problems

Detail what the problem is and how to fix it

If you are unsure, it is always best to contact a steward and fill out a problem report

Common Projects