Difference between revisions of "Delta JT360 Jointer"

Revision as of 03:38, 9 February 2022

This tool is no longer at Asmbly Makerspace

The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List

The Delta JT360 is a conventional jointer with 6" cutting width. A helical head is installed.

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.

Revision as of 23:19, 12 January 2022 (view source) Admin (talk \| contribs) ← Older edit		Revision as of 03:38, 9 February 2022 (view source) Jon (talk \| contribs) Newer edit →
Line 1:		Line 1:
−	{{~~graveyard~~}}	+	{{boneyard}}

	The Delta JT360 is a conventional jointer with 6" cutting width. A helical head is installed.		The Delta JT360 is a conventional jointer with 6" cutting width. A helical head is installed.