Dayton Sheet Metal Machine
From Asmbly Wiki
The Dayton 12G597 is a 52" three-in-one (shear, brake, roll) sheet metal machine.
Members must complete the Metal Shop Safety Class before using this tool
Operations may be performed on sheet stock up to 52" in width in the following thicknesses:
| Material | Shear | Brake | Roll |
|---|---|---|---|
| Mild Steel | 16ga | 16ga | 16ga |
| Aluminum | 12ga | 14ga | 12ga |
| Stainless Steel | 22ga | 21ga | 22ga |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
