Elegoo Saturn 3 Ultra

Asmbly owns the ELEGOO Saturn printer SLA printers. We also own the ELEGOO Mars 2P, a cure post-processing equipment. Only resin purchased from Asmbly may be used in these printers.

Members must complete the Intro to Resin 3D Printing Class before using this tool

$ There is an extra charge to use this tool $

Unnamed SLA Printer

Manufacturer	Elegoo
Model	Elegoo Saturn 3 Ultra
LCD	10-inch 12K Mono LCD
System	EL3D-4.0
Slicer Software	CHITUBOX & Voxeldance Tango
Technology	MSLA Stereolithography
Layer Thickness	0.01 - 0.2mm
Printing Speed	Maximum 150mm/h
Z Axis Accuracy	0.01mm
XY Resolution	19 x 24μm (11520 x 5120)
Build Volume	218.88mm(L) * 122.88mm(W) * 260mm(H)
Light Source	COB + Refractive Light Source (Wavelength 405 nm)
Languages	Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese
Connectivity	USB Interface & Wi-Fi
Weight	16.2kg
Operation	4.0-inch Capacitive Touch Screen
Power Requirements	100-240V 50/60Hz 24V 7.5A
Printer Dimensions	305.9mm(L) * 273mm(W) * 562.5mm(H) }}

Safety

Universal Safety

• Be aware of your surroundings, especially when handling large materials.
• Do not approach anyone operating equipment. Stand patiently in their field of view.
• Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.

Equipment-Specific Safety

<CLASS> is required to use this tool.

<PPE> are required to use this tool.

Etiquette (if relevant)

Example:

If you are going to be spending a lot of time on the miter saw, write "miter saw" in the optional notes of your Skedda booking so other woodshop users will know.

Use Case

Description of what the tool does and when or why to use it

Asmbly use: e.g. Skedda required, or part of an area.

Materials

Acceptable Materials

List of materials allowed or not allowed (whichever is easiest) on this tool

e.g. no metal, no lubricants, no wet glue, no chlorinated materials

Required pre-processing (e.g. pre-jointed / planed lumber before table saw)

Material Limits

Table of min max dimensions / Material limits

Consumables

Shop provided consumables and where to find them.

e.g. bulk lubricate or cleaning supplies

What consumables to bring from home

e.g. sand paper, glue, specialty precision tools or materials

Cleanup

Universal Cleaning Guide

• Return the equipment to neutral.
• Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
• Clear the floor of any tripping hazards, like power cords.
• Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
• Leave the shop 110% better than you found it.

Tool Specific Cleaning Guide

• What to clean
• How to clean
• Where to dispose of waste

Example for Miter Saw:

1. Brush off top surface
2. Brush around machine
3. Clean infeed and outfeed tables
4. Sweep floor
5. Wall vacuum hose works well

Troubleshooting

Common Problems

Detail what the problem is and how to fix it

If you are unsure, it is always best to contact a steward and fill out a problem report