Delta 31-484 Spindle Sander

⚠️ This page is not as complete as we'd like. Please help by editing it to improve it! See How to contribute to this wiki for tips.

The Delta 31-484 is a 1hp oscillating spindle sander with a 24" square cast-iron table. The spindle may be tilted up to 45º for sanding complex curves.

Members must complete the Stationary Sanders Class before using this tool

The spindle tilt wheel has stops at 90° and 45°; rotate clockwise to increase the angle, counterclockwise to decrease. The angle indicator may not reflect the spindle angle accurately as you adjust; as always, measure the spindle angle as you adjust. If the 90° or 45° stop positions are out of alignment, use any maintenance QR code in the shop to request that they be adjusted.

Resources

• Instruction Manual

Maintenance

This tool is owned by Jon Eklund and hosted at Asmbly for members to use. Please submit a problem report if maintenance is required.