File:Form2-cleaning-mesh-hex.stl

From Asmbly Wiki
Revision as of 03:00, 9 November 2021 by Alan (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Form2-cleaning-mesh-hex.stl(file size: 166 KB, MIME type: application/sla)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Summary

Use this to help clean the bed after a failed print. Instructions for a similar cleaning job for the Form3 may be helpful: https://support.formlabs.com/s/article/Cleaning-a-failed-print-with-the-cleaning-mesh?language=en_US. Similar instructions for the Form2, and the official cleaning mesh, are evidently not available from Formlabs.

Created by Alan at the direction of James Manley, the owner of the Form2.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current02:53, 9 November 2021 (166 KB)Alan (talk | contribs)Use this to help clean the bed after a failed print. Instructions for a similar cleaning job for the Form3 may be helpful: https://support.formlabs.com/s/article/Cleaning-a-failed-print-with-the-cleaning-mesh?language=en_US. Similar instructions for the Form2, and the official cleaning mesh, are evidently not available from Formlabs.

The following page uses this file: