PolyPrinter 229
From Asmbly Wiki
Members must complete the Filament 3D Printing Class before using this tool
The Polyprinter 229 is fast, reliable and straightforward to use. We usually leave it set up for ABS printing.
| Status | Active |
| Manufacturer | Polyprinter |
| Model | 229 |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 229 x 229 x 229mm |
| Max Bed Temperature | 125(?)C |
| Max Nozzle Temperature | 300(?)C |
| Max Print Speed | 250(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Critical Info!
- Do NOT use metal tools on the Bed
- Avoid touching the plate with your fingers. Skin oil can affect performances.
- Requires use of KISSlicer
- Only use Polyprinter brand filament reels
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
