Combo Heat Press Machine

From Asmbly Wiki
Revision as of 22:06, 22 October 2024 by Rolo (talk | contribs) (Initial draft)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Donated TOPDEEP Heat Press, specifically setup to be a Hat Press.

Safety

Universal Safety

  • Be aware of your surroundings, especially when handling large materials.
  • Do not approach anyone operating equipment. Stand patiently in their field of view.
  • Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.

Equipment-Specific Safety

Etiquette

Use Case

The Prusa MK3S+ are good printers to produce sma

Materials

Acceptable Materials

Material Limits

Consumables

You are responsible for providing your own materials.Operation

Controls

Cleanup

Universal Cleaning Guide

  • Return the equipment to neutral.
  • Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
  • Clear the floor of any tripping hazards, like power cords.
  • Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
  • Leave the shop 110% better than you found it.

Tool Specific Cleaning Guide

Resources

Troubleshooting

Common Problems

If you are unsure, it is always best to contact a steward and fill out a problem report

Maintenance

The information below is primarily for stewards.