File:First layer calibration network.stl

From Asmbly Wiki
Revision as of 18:19, 17 October 2024 by Aneel (talk | contribs) (This prints a test pattern across the whole bed of lines and squares. Slice it with a 0 degree infill and it will help you dial in the first layer)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

First_layer_calibration_network.stl(file size: 19 KB, MIME type: application/sla)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Summary

This prints a test pattern across the whole bed of lines and squares. Slice it with a 0 degree infill and it will help you dial in the first layer

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current18:19, 17 October 2024 (19 KB)Aneel (talk | contribs)This prints a test pattern across the whole bed of lines and squares. Slice it with a 0 degree infill and it will help you dial in the first layer

There are no pages that use this file.