File:First layer calibration E.stl

From Asmbly Wiki
Revision as of 18:22, 17 October 2024 by Aneel (talk | contribs) (This prints a single layer flat shape with a comb pattern like a bunch of Es. Slice it at 0 degree infill and use it to check or adjust the First Layer settings.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

First_layer_calibration_E.stl(file size: 7 KB, MIME type: application/sla)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Summary

This prints a single layer flat shape with a comb pattern like a bunch of Es. Slice it at 0 degree infill and use it to check or adjust the First Layer settings.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current18:22, 17 October 2024 (7 KB)Aneel (talk | contribs)This prints a single layer flat shape with a comb pattern like a bunch of Es. Slice it at 0 degree infill and use it to check or adjust the First Layer settings.

There are no pages that use this file.