Tormach Class
From Asmbly Wiki
Revision as of 01:37, 30 September 2021 by Jon (talk | contribs) (Created page with "The Tormach class is taught by [mailto:epeterson2733@gmail.com Eric Peterson ] This class focuses on <b>CNC</b> milling - the Manual Milling Class or demonstrated knowled...")
The Tormach class is taught by Eric Peterson
This class focuses on CNC milling - the Manual Milling Class or demonstrated knowledge of manual milling is a prerequisite for the Tormach class. The class is separated in to two parts:
- Developing CAM toolpaths in Fusion 360 Manufacturing(NOTE: you will need to learn 3D modeling in Fusion on your own)
- Tormach operation and use: (You will learn how to setup and use the Tormach and make a battery terminal clamp in the process.)
- Cost of each class section is $100 but subject to change.
Resources
- Basics of Fusion360 (video)
- CNC Machining by NYC CNC (video)
- Peruse the shop's copy of Precision Machining Technology or Buy on Amazon
Material/Tooling Suppliers
Dixie Tool Crib (South Austin) Sparktech (Round Rock)
