Difference between revisions of "CR-10S"

From Asmbly Wiki
m (Pearlgreymusic moved page CR-10 to CR-10S)
m (Pearlgreymusic moved page CR-10S to Creality CR-10S)
(No difference)

Revision as of 04:05, 27 June 2022

ClassWarningIcon.png Members must complete the 3D Printing Class before using this tool



CR10.jpg


The Creality CR-10S is a 3D printer at the space. Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10. This CR-10S is modified, so it may have specifications different from the stock specifications outlined in the manual. List of known modifications TBA.


Unknown Name (CR-10S)
Status Active
Manufacturer Prusa
Model i3 MK3S+
Nozzle Size 0.4mm
Nozzle Type Brass(?)
Nozzle Count 1
Filament Size 1.75mm
Print Volume 300 x 300 x 400mm
Max Bed Temperature 90(?)C
Max Nozzle Temperature 230(?)C
Max Print Speed 60(?)mm/s
Extruder Type Bowden
Manual Unknown
Control Interface Unknown
Network Address Unknown



Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.