CR-10S
From Asmbly Wiki
(Redirected from Creality CR-10S)
This tool is no longer at Asmbly Makerspace
The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List
The Creality CR-10S is a 3D printer at the space. Because it has a Bowden extruder setup, it is NOT recommended to use flexible filaments (such as TPU) with the CR-10. This CR-10S is modified, so it may have specifications different from the stock specifications outlined in the manual. List of known modifications TBA.
| Status | Retired |
| Video Feed | Unknown |
| Manufacturer | Creality |
| Model | CR-10S |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 300 x 400mm |
| Max Bed Temperature | 90(?)C |
| Max Nozzle Temperature | 230(?)C |
| Max Print Speed | 60(?)mm/s |
| Extruder Type | Bowden |
| Manual | Unknown |
| Control Interface | Octoprint |
| Network Address | http://192.168.0.175:5002 |
