Difference between revisions of "Dixie-Narco 368 Vending Machine"

From Asmbly Wiki
Line 7: Line 7:
 
It appears to have been refurbished at some point in its history.  It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine.  The model/serial plate has had all the paint stripped off, so only the stamped characters remain.
 
It appears to have been refurbished at some point in its history.  It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine.  The model/serial plate has had all the paint stripped off, so only the stamped characters remain.
  
[[File:AsmblyDNCB368_ID.jpg|frame|center|720px|Our ID plate]]
+
[[File:AsmblyDNCB368_ID.jpg|frame,center|720px|Our ID plate]]
[[File:TypicalDNCB368_ID.jpg|frame|center|720px|Sample/typical ID plate]]
+
[[File:TypicalDNCB368_ID.jpg|frame,center|720px|Sample/typical ID plate]]
  
  

Revision as of 19:21, 27 November 2022

Asmbly's soda machine is a vintage Dixie Narco 368 single-price vending machine. It's equipped with a CoinCo 3341-S changer and a $1 bill acceptor.


DN368.jpg


This machine is an '80s-era electromechanical vending machine so equipping it with a card reader would require prohibitively expensive rework -- it would be cheaper to replace the machine. Asmbly would be more than happy to accept donation of a modern multi-price vending machine with card reader if anyone were so inclined.

It appears to have been refurbished at some point in its history. It has the button panel of a flat-front machine, but it has the curved door graphic of a later model "MC" machine. The model/serial plate has had all the paint stripped off, so only the stamped characters remain.

Our ID plate Sample/typical ID plate


Resources


Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.