View source for TK-105 Lathe

{{Boneyard}}

Asmbly's lathe is believed to be a '''Takang TK-105L 12x40 Engine Lathe'''.  It was probably built in the late 1970's and features a 3-jaw chuck and a built-in recirculating coolant system.

<!--
Because this is a real industrial machine, and not a toy, the ATXHackerspace membership has decided to require a minimum of demonstrable skill necessary to safely operate and maintain the lathe.  This can be done by either taking a operations class or by passing the final proctored examinations.  Also due to safety concerns, operators will be required to have close supervision for their first [FIXME: 10?] hours operating the machine.  After your probationary period, you may operate the machine while there is a designated "safety buddy" within the main shop area.   Lathe time is scheduled on a first-come-first serve basis.  Only certified instructors are allowed to operate the lathe alone or without supervision.
-->

{{ToolPhoto|tk105.jpg}}

== Tooling ==

* Quick change Toolpost (BXA-200 series)
* HSS tooling
* Carbide tooling
* Knurling tool

== Resources ==

* [http://wiki.atxhs.org/images/f/fd/Takang_Manual.pdf PDF manual for the lathe]
* http://www.bbssystem.com/manuals/Lathe-Tutorial.pdf
* MIT Videos:
** Beginning Operation: Using the Lathe I [http://techtv.mit.edu/videos/144-machine-shop-8]
** Intermediate Operation: Using the lathe II [http://techtv.mit.edu/videos/134-machine-shop-9]
** Advanced Operation: Using the Lathe III [http://techtv.mit.edu/videos/172-machine-shop-10]

<!--
== Tooling Wish List ==

The lathe came with almost no tooling, and what it came with is missing parts.  In general there are some things that it *must* have, and other things which are just plain convenient.

* Live centers (lathe tail stock type not currently known):
** http://www.harborfreight.com/mt2-live-center-38573.html
** http://www.harborfreight.com/mt2-bullnose-live-center-40090.html
** http://www.harborfreight.com/mt3-live-center-38574.html
* Tool holders - The lathe comes with a quick tool changer, but not tool holders.  These look similar to [http://www.harborfreight.com/10-inch-15-inch-swing-quick-change-toolpost-and-holder-set-34816.html this].
* indexed carbide inserts and holders
* threading tools
* boring bars
* live center
* dead center
* micro stop
* collet changer
* 4-jaw chuck
* 3-jaw adjustable - where you can remove the concentricity.
* center drills
* Telescopic gauges (for measuring ID's) [http://www.harborfreight.com/6-piece-telescoping-gauge-set-5649.html (for example)]
* Micrometers - I think the shop has an 0-1", but if people really start using the machine tools will need a 0-4" set if not up to ~6".
-->