Difference between revisions of "PrusaSlicer"
(Add Filament Profile Instructions) |
m (Add more clarity to →Setup) |
||
| Line 2: | Line 2: | ||
== Setup == | == Setup == | ||
| − | Download PrusaSlicer, then | + | Download the PrusaSlicer installer that is correct for your computer, then follow the directions to install it. |
| − | For use with the printers at ASMBLY, it's only necessary to make choices from the following two screens: | + | Open the application. This will open the Configuration Assistant. If you later need to download more configurations, you can open the Configuration Assistant at any time by clicking <code>Configuration</code>-><code>Configuration Assistant...</code> |
| + | |||
| + | For use with the printers at ASMBLY, it's only necessary to make choices from the following two screens. You may skip all other steps in the configuration wizard: | ||
=== Prusa FFF === | === Prusa FFF === | ||
| − | You will need to select profiles for the two types of Prusa FFF printers we have as ASMBLY, the '''[[Prusa MK3S+|Original Prusa i3 MK3S+]]''' and the '''Original Prusa XL - 5T Input Shaper'''. Both types of printers have 0.4mm nozzles | + | You will need to select profiles for the two types of Prusa FFF printers we have as ASMBLY, the '''[[Prusa MK3S+|Original Prusa i3 MK3S+]]''' and the '''Original Prusa XL - 5T Input Shaper'''. Both types of printers have 0.4mm nozzles. |
| + | |||
| + | '''NOTE:''' This screen may have preselected the first printer in the list, '''Original Prusa MK4 Input Shaper.''' If you do not need that profile for you personal use outside of ASMBLY, we recommend un-checking that box to avoid confusion. | ||
[[File:MK3 Family Annotated.png|alt=A screenshot of the MK3 Family section on the Prusa FFF Step in PrusaSlicer Configuration Assistant. There is a box around Original Prusa i3 MK3S & MK3S+ and an arrow pointing to the check box for 0.4mm nozzle indicating that you should check this box|none|thumb|500x500px|Scroll to find '''MK3 Family'''. Select the '''Original Prusa i3 MK3S & MK3S+''' with '''0.4 mm nozzle''']] | [[File:MK3 Family Annotated.png|alt=A screenshot of the MK3 Family section on the Prusa FFF Step in PrusaSlicer Configuration Assistant. There is a box around Original Prusa i3 MK3S & MK3S+ and an arrow pointing to the check box for 0.4mm nozzle indicating that you should check this box|none|thumb|500x500px|Scroll to find '''MK3 Family'''. Select the '''Original Prusa i3 MK3S & MK3S+''' with '''0.4 mm nozzle''']] | ||
[[File:XL Family Annotated.png|alt=The XL Multi-Tool section on the Prusa FFF Step in PrusaSlicer Configuration Assistant. There is a box around Original Prusa XL - 5T Input Shaper and an arrow pointing to the check box for 0.4mm nozzle indicating that you should check this box.|none|thumb|500x500px|Scroll to find '''XL Multi-Tool Family'''. Select the '''Original Prusa XL - 5T Input Shaper''' with '''0.4 mm nozzle''']] | [[File:XL Family Annotated.png|alt=The XL Multi-Tool section on the Prusa FFF Step in PrusaSlicer Configuration Assistant. There is a box around Original Prusa XL - 5T Input Shaper and an arrow pointing to the check box for 0.4mm nozzle indicating that you should check this box.|none|thumb|500x500px|Scroll to find '''XL Multi-Tool Family'''. Select the '''Original Prusa XL - 5T Input Shaper''' with '''0.4 mm nozzle''']] | ||
=== Filaments === | === Filaments === | ||
| − | If you know the brand of your filament, it can be helpful to download the configuration for that specific filament. If you don't, you should do well with generic filament profiles. We recommend you start with '''Generic PLA''' and '''Generic PETG'''. You can find these profiles by selecting '''(All)''' category under '''Printer:''', '''(All)''' category under '''Type:''', and '''Generic''' under '''Vendor''' | + | If you know the brand of your filament, it can be helpful to download the configuration for that specific filament. If you don't, you should do well with generic filament profiles. We recommend you start with '''Generic PLA''' and '''Generic PETG'''. You can find these profiles by selecting '''(All)''' category under '''Printer:''', '''(All)''' category under '''Type:''', and '''Generic''' under '''Vendor.''' |
| + | |||
| + | Note: you may have to scroll down to find '''Generic'''. | ||
[[File:Filaments Annotated.png|alt=A screenshot of the Filament Profiles Selection screen in the PrusaSlicer Configuration Assistant. It has arrows to indicate that you should select the "(All)" category under "Printer:", the "(All)" category under "Type:", the "Generic" category under "Vendor" and then check the boxes next to "Generic PETG" and "Generic PLA"|none|thumb|500x500px|Find Generic filament Profiles under '''(All)'''->'''(All)'''->'''Generic'''. Select '''Generic PLA''' and '''Generic PETG''']] | [[File:Filaments Annotated.png|alt=A screenshot of the Filament Profiles Selection screen in the PrusaSlicer Configuration Assistant. It has arrows to indicate that you should select the "(All)" category under "Printer:", the "(All)" category under "Type:", the "Generic" category under "Vendor" and then check the boxes next to "Generic PETG" and "Generic PLA"|none|thumb|500x500px|Find Generic filament Profiles under '''(All)'''->'''(All)'''->'''Generic'''. Select '''Generic PLA''' and '''Generic PETG''']] | ||
| + | |||
| + | == Finishing Setup == | ||
| + | Once you have selected printer profiles and filament profiles, complete your setup by pressing the button that says '''Finish'''. This button can be found on the bottom right of the configuration assistant window. | ||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Latest revision as of 14:31, 24 May 2024
We recommend PrusaSlicer as a slicing software to use with the Prusa filament printers at ASMBLY.
Setup
Download the PrusaSlicer installer that is correct for your computer, then follow the directions to install it.
Open the application. This will open the Configuration Assistant. If you later need to download more configurations, you can open the Configuration Assistant at any time by clicking Configuration->Configuration Assistant...
For use with the printers at ASMBLY, it's only necessary to make choices from the following two screens. You may skip all other steps in the configuration wizard:
Prusa FFF
You will need to select profiles for the two types of Prusa FFF printers we have as ASMBLY, the Original Prusa i3 MK3S+ and the Original Prusa XL - 5T Input Shaper. Both types of printers have 0.4mm nozzles.
NOTE: This screen may have preselected the first printer in the list, Original Prusa MK4 Input Shaper. If you do not need that profile for you personal use outside of ASMBLY, we recommend un-checking that box to avoid confusion.
Filaments
If you know the brand of your filament, it can be helpful to download the configuration for that specific filament. If you don't, you should do well with generic filament profiles. We recommend you start with Generic PLA and Generic PETG. You can find these profiles by selecting (All) category under Printer:, (All) category under Type:, and Generic under Vendor.
Note: you may have to scroll down to find Generic.
Finishing Setup
Once you have selected printer profiles and filament profiles, complete your setup by pressing the button that says Finish. This button can be found on the bottom right of the configuration assistant window.
