Difference between revisions of "QIDI X-Max"
From Asmbly Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Boneyard}} | {{Boneyard}} | ||
| − | The QIDI X-Max is an enclosed single-extruder 3D Printer with a | + | The QIDI X-Max is an enclosed single-extruder 3D Printer with a high range of materials it can print. It lives to the side of the printer cabinet |
{{ToolPhoto|QIDI_X-Max.jpg}} | {{ToolPhoto|QIDI_X-Max.jpg}} | ||
| + | |||
| + | |||
| + | {{Infobox 3d printer | ||
| + | | Printer Name = Unknown Name (QIDI X-Max) | ||
| + | | Status = {{PrinterRemoved}} | ||
| + | | Manufacturer = QIDI | ||
| + | | Model = X-MAX | ||
| + | | Network Address = Unknown | ||
| + | | Nozzle Size (mm) = 0.4 | ||
| + | | Nozzle Type = Brass(?) | ||
| + | | Nozzle Count = 1 | ||
| + | | Filament Size (mm) = 1.75 | ||
| + | | Print Volume (mm) = 300 x 250 x 300 | ||
| + | | Max Bed Temperature (C) = 100 | ||
| + | | Max Nozzle Temperature (C) = 300 | ||
| + | | Max Print Speed (mm/s) = 100 | ||
| + | | Extruder Type = Direct | ||
| + | }} | ||
== Resources == | == Resources == | ||
* [http://www.qd3dprinter.com/products/x-max/ Product Page] | * [http://www.qd3dprinter.com/products/x-max/ Product Page] | ||
Latest revision as of 03:52, 28 June 2022
This tool is no longer at Asmbly Makerspace
The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List
The QIDI X-Max is an enclosed single-extruder 3D Printer with a high range of materials it can print. It lives to the side of the printer cabinet
| Status | Retired |
| Manufacturer | QIDI |
| Model | X-MAX |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 250 x 300mm |
| Max Bed Temperature | 100C |
| Max Nozzle Temperature | 300C |
| Max Print Speed | 100mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
