Difference between revisions of "Flashforge Creator Pro"
From Asmbly Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
{{Infobox 3d printer | {{Infobox 3d printer | ||
| Printer Name = Unknown Name (Creator Pro) | | Printer Name = Unknown Name (Creator Pro) | ||
| − | | Status = {{ | + | | Status = {{PrinterRemoved}} |
| Manufacturer = Flashforge | | Manufacturer = Flashforge | ||
| Model = Creator Pro | | Model = Creator Pro | ||
Latest revision as of 21:19, 24 March 2023
This tool is no longer at Asmbly Makerspace
The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List
The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.
| Status | Retired |
| Manufacturer | Flashforge |
| Model | Creator Pro |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 1.75mm |
| Print Volume | 227 x 148 x 150mm |
| Max Bed Temperature | 120C |
| Max Nozzle Temperature | 240C |
| Max Print Speed | 100mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
