Difference between revisions of "Lulzbot TAZ"
From Asmbly Wiki
| Line 1: | Line 1: | ||
| − | The Lulzbot TAZ is a large dual-extruder 3D printer. It lives in the printer cabinet. | + | {{Required|3D Printing}} |
| + | {{ToolPhoto|Lulzbot_TAZ.jpg}} | ||
| + | |||
| + | The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet. | ||
| − | |||
| − | {{ | + | {{Infobox 3d printer |
| + | | Printer Name = Unknown Name (TAZ 2.1) | ||
| + | | Status = {{PrinterBroken}} | ||
| + | | Manufacturer = Lulzbot | ||
| + | | Model = TAZ 2.1 | ||
| + | | Network Address = Unknown | ||
| + | | Nozzle Size (mm) = 0.4 | ||
| + | | Nozzle Type = Brass(?) | ||
| + | | Nozzle Count = 2 | ||
| + | | Filament Size (mm) = 1.75 | ||
| + | | Print Volume (mm) = 298(?) x 280(?) x 250(?) | ||
| + | | Max Bed Temperature (C) = 100(?) | ||
| + | | Max Nozzle Temperature (C) = 290(?) | ||
| + | | Max Print Speed (mm/s) = 100(?) | ||
| + | | Extruder Type = Direct | ||
| + | }} | ||
==Resources== | ==Resources== | ||
Revision as of 04:17, 27 June 2022
Members must complete the 3D Printing Class before using this tool
The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet.
| Status | Out of Order |
| Manufacturer | Lulzbot |
| Model | TAZ 2.1 |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 1.75mm |
| Print Volume | 298(?) x 280(?) x 250(?)mm |
| Max Bed Temperature | 100(?)C |
| Max Nozzle Temperature | 290(?)C |
| Max Print Speed | 100(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
