Difference between revisions of "QIDI X-MAX"
From Asmbly Wiki
| Line 1: | Line 1: | ||
| − | The QIDI X-MAX is a large 3D printer. It lives to the side of the printer cabinet | + | {{Required|3D Printing}} |
| + | {{ToolPhoto|Qidi x-max.png}} | ||
| + | |||
| + | The QIDI X-MAX is a large 3D printer with a high range of materials it can print. It lives to the side of the printer cabinet | ||
| + | |||
| + | {{Infobox 3d printer | ||
| + | | Printer Name = Unknown Name (CR-10S) | ||
| + | | Status = {{PrinterBroken}} | ||
| + | | Manufacturer = QIDI | ||
| + | | Model = X-MAX | ||
| + | | Network Address = Unknown | ||
| + | | Nozzle Size (mm) = 0.4 | ||
| + | | Nozzle Type = Brass(?) | ||
| + | | Nozzle Count = 1 | ||
| + | | Filament Size (mm) = 1.75 | ||
| + | | Print Volume (mm) = 300 x 250 x 300 | ||
| + | | Max Bed Temperature (C) = 100 | ||
| + | | Max Nozzle Temperature (C) = 300 | ||
| + | | Max Print Speed (mm/s) = 100 | ||
| + | | Extruder Type = Direct | ||
| + | }} | ||
| − | |||
| − | + | == Resources == | |
| + | * [[Media:QIDI_XMax_User_Manual.pdf|User Manual]] | ||
[[Category:3D Printing]] | [[Category:3D Printing]] | ||
Revision as of 04:22, 27 June 2022
Members must complete the 3D Printing Class before using this tool
The QIDI X-MAX is a large 3D printer with a high range of materials it can print. It lives to the side of the printer cabinet
| Status | Out of Order |
| Manufacturer | QIDI |
| Model | X-MAX |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 1 |
| Filament Size | 1.75mm |
| Print Volume | 300 x 250 x 300mm |
| Max Bed Temperature | 100C |
| Max Nozzle Temperature | 300C |
| Max Print Speed | 100mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
