Difference between revisions of "Lulzbot TAZ"
From Asmbly Wiki
Line 7: | Line 7: | ||
{{Infobox 3d printer | {{Infobox 3d printer | ||
| Printer Name = Unknown Name (TAZ 2.1) | | Printer Name = Unknown Name (TAZ 2.1) | ||
− | | Status = {{ | + | | Status = {{{PrinterActive}} |
| Manufacturer = Lulzbot | | Manufacturer = Lulzbot | ||
| Model = TAZ 2.1 | | Model = TAZ 2.1 |
Revision as of 17:55, 1 October 2022
Members must complete the Filament 3D Printing Class before using this tool
The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet.
Status | { Active |
Manufacturer | Lulzbot |
Model | TAZ 2.1 |
Nozzle Size | 0.4mm |
Nozzle Type | Brass(?) |
Nozzle Count | 2 |
Filament Size | 1.75mm |
Print Volume | 298(?) x 280(?) x 250(?)mm |
Max Bed Temperature | 100(?)C |
Max Nozzle Temperature | 290(?)C |
Max Print Speed | 100(?)mm/s |
Extruder Type | Direct |
Manual | Unknown |
Control Interface | Unknown |
Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.