Difference between revisions of "Dayton Sheet Metal Machine"
From Asmbly Wiki
(Created page with "{{ToolUnavailable}} The Dayton 12G597 is a 52" three-in-one (shear, brake, roll) sheet metal machine. {{Required|Metal Forming}} Operations may be performed on sheet stock...") |
|||
| Line 1: | Line 1: | ||
| − | + | The Dayton 12G597 is a 52" three-in-one (shear, brake, roll) sheet metal machine. It still needs a stand but it's usable now. | |
| − | + | {{Required|Metal Forming}} | |
| − | {{ | + | {{ToolPhoto|Dayton_15g597.jpg}} |
Operations may be performed on sheet stock up to 52" in width in the following thicknesses: | Operations may be performed on sheet stock up to 52" in width in the following thicknesses: | ||
| Line 17: | Line 17: | ||
| Stainless Steel || 22ga || 21ga || 22ga | | Stainless Steel || 22ga || 21ga || 22ga | ||
|} | |} | ||
| − | |||
| − | |||
==Resources== | ==Resources== | ||
Revision as of 20:26, 26 November 2022
The Dayton 12G597 is a 52" three-in-one (shear, brake, roll) sheet metal machine. It still needs a stand but it's usable now.
Members must complete the Metal Forming Class before using this tool
Operations may be performed on sheet stock up to 52" in width in the following thicknesses:
| Material | Shear | Brake | Roll |
|---|---|---|---|
| Mild Steel | 16ga | 16ga | 16ga |
| Aluminum | 12ga | 14ga | 12ga |
| Stainless Steel | 22ga | 21ga | 22ga |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
