Difference between revisions of "Lulzbot TAZ"
From Asmbly Wiki
m (Pearlgreymusic moved page Lulzbot TAZ 2.1 to Lulzbot TAZ over redirect: Turns out page renames can break the QR Codes) |
|||
| Line 1: | Line 1: | ||
| − | {{Required|3D Printing}} | + | {{Required|Filament 3D Printing}} |
{{ToolPhoto|Lulzbot_TAZ.jpg}} | {{ToolPhoto|Lulzbot_TAZ.jpg}} | ||
Revision as of 04:32, 9 September 2022
Members must complete the Filament 3D Printing Class before using this tool
The Lulzbot TAZ 2.1 is a large dual-extruder 3D printer. It lives in the printer cabinet.
| Status | Out of Order |
| Manufacturer | Lulzbot |
| Model | TAZ 2.1 |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 1.75mm |
| Print Volume | 298(?) x 280(?) x 250(?)mm |
| Max Bed Temperature | 100(?)C |
| Max Nozzle Temperature | 290(?)C |
| Max Print Speed | 100(?)mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
