Difference between revisions of "Equipment Template"
| Line 7: | Line 7: | ||
== Safety == | == Safety == | ||
| − | + | {{UniversalSafety}} | |
| − | |||
| − | |||
| − | |||
| − | |||
==== Equipment-Specific Safety ==== | ==== Equipment-Specific Safety ==== | ||
| Line 57: | Line 53: | ||
== Cleanup == | == Cleanup == | ||
| − | + | {{UniversalCleaning}} | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==== Tool Specific Cleaning Guide ==== | ==== Tool Specific Cleaning Guide ==== | ||
Revision as of 01:34, 9 July 2024
Members must complete the Class before using this tool
Description of tool (name and specifications) and where it is in the space.
<INSERT PHOTO OF EQUIPMENT>
Safety
Universal Safety
- Be aware of your surroundings, especially when handling large materials.
- Do not approach anyone operating equipment. Stand patiently in their field of view.
- Use PPE, including filtration and eye protection, when handling dust or emptying dust/shaving containers.
Equipment-Specific Safety
<CLASS> is required to use this tool.
<PPE> are required to use this tool.
Etiquette (if relevant)
Example:
If you are going to be spending a lot of time on the miter saw, write "miter saw" in the optional notes of your Skedda booking so other woodshop users will know.
Use Case
Description of what the tool does and when or why to use it
Materials
Acceptable Materials
List of materials allowed or not allowed (whichever is easiest) on this tool
e.g. no metal, no lubricants, no wet glue, no chlorinated materials
Required pre-processing (e.g. pre-jointed / planed lumber before table saw)
Maximum Sizes and Weights
Consumables
Where to find consumables in shop like distilled water or cleaning supplies
e.g. Brooms and dust pans are at either end of the shop, by the bandsaws, by the dust collector, and by the bathroom
What consumables to bring from home
Feeds and Speeds
Setup (pictures encouraged)
Controls
Settings and Adjustments
Basic Operation
Include Skedda! e.g. Using this tool requires you to book time in Skedda under "Woodshop - User" 1 thru 6.
Cleanup
Universal Cleaning Guide
- Return the equipment to neutral.
- Sweep up any dust and debris around the tool, your table top, and the floor - both in the equipment area and your work area.
- Clear the floor of any tripping hazards, like power cords.
- Empty trash cans and dust collectors that are halfway full or more into the Asmbly dumpster behind the workshop.
- Leave the shop 110% better than you found it.
Tool Specific Cleaning Guide
- What to clean
- How to clean
- Where to dispose of waste
Example for Miter Saw:
- Brush off top surface
- Brush around machine
- Clean infeed and outfeed tables
- Sweep floor
- Wall vacuum hose works well
Resources
Manual
Discourse Links
SIG Information (if relevant)
External Resources
Troubleshooting
Common Problems
Detail what the problem is and how to fix it
If you are unsure, it is always best to contact a steward and fill out a problem report
