Difference between revisions of "Shaper Origin Handheld CNC"
m (Formatting) |
|||
| Line 9: | Line 9: | ||
==Consumables== | ==Consumables== | ||
| − | In addition to router bits, you'll need to supply your own Shaper Tape, which you can {{AmazonBuy|B0874G69PN}} or [https://www.rockler.com/150-roll-of-shapertape-for-shaper-origin Buy at Rockler]. You'll need around two rolls for every 3 4x8 sheets of plywood. The Workstation does not require Shaper Tape. | + | In addition to router bits, you'll need to supply your own Shaper Tape, which you can {{AmazonBuy|B0874G69PN}}or locally [https://www.rockler.com/150-roll-of-shapertape-for-shaper-origin Buy at Rockler]. You'll need around two rolls for every 3 4x8 sheets of plywood. The Workstation does not require Shaper Tape. |
==ShaperHub== | ==ShaperHub== | ||
Revision as of 03:11, 8 January 2022
The Shaper Origin is a novel portable CNC tool that has been recently gifted to Asmbly. It will be made available for members to use once we've shaken the kinks out of the logistics and curriculum.
Members must complete the Shaper Origin Class before using this tool
Storage
The Shaper Origin, Shaper Workstation, and extractor are in locked storage linked to your OpenPath ID. Only authorized users are able to unlock the Shaper Origin.
Consumables
In addition to router bits, you'll need to supply your own Shaper Tape, which you can Buy on Amazon or locally Buy at Rockler. You'll need around two rolls for every 3 4x8 sheets of plywood. The Workstation does not require Shaper Tape.
ShaperHub
Our Shaper Origin is linked to an Asmbly ShaperHub account.
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
