Tormach PCNC 1100
From Asmbly Wiki
Revision as of 03:39, 5 October 2021 by Jon (talk | contribs) (Jon moved page Tormach PCNC1100 to Tormach PCNC 1100)
Members must complete the Tormach Class before using this tool
- 1.5hp R8 Spindle
- Table Size: 34" x 9.5"
- Table Slots: 3 Slots 5/8"
- Travel: 18" x 9.5" x 16.25" (X,Y,Z)
- Spindle Nose to Table: 17" maximum
- Spindle Center to Column: 11"
- Spindle Nose Diameter: 3 3/8"
- Max Workpiece : 500 lbs Maximum
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
Purchased by the ATX Hackerspace in January of 2019.
Serial number 4848
