Tormach PCNC 1100 Overhaul
Members must complete the Tormach Class before using this tool
The Tormach PCNC 1100 is in an enclosure on the edge of the metal shop, adjoining the wood shop.
Specifications
- 1.5hp R8 Spindle
- Table Size: 34" x 9.5"
- Table Slots: 3 Slots 5/8"
- Travel: 18" x 9.5" x 16.25" (X,Y,Z)
- Spindle Nose to Table: 17" maximum
- Spindle Center to Column: 11"
- Spindle Nose Diameter: 3 3/8"
- Max Workpiece : 500 lbs Maximum
Safety
Required Classes and PPE
You must take the Tormach Class before using this machine.
No special PPE is required for this machine, but hearing protection is advised in addition to the general shop requirements of safety glasses and closed-toed shoes. Safety glasses may be found on a shelf on the back side of the Tormach enclosure, near the horizontal bandsaw.
Use Case
The Tormach is used for CNC machining. It can be used to create precise parts out of a variety of materials, including metals, plastics, and wood.
Materials
Feeds and Speeds
The Tormach is configured in the High Belt position, which gives a range of 250-5140 RPM at the spindle. ProvenCut is a good source for tested feeds and speeds.
Maximum Sizes and Weights
- Travel: 18" x 9.5" x 16.25" (X,Y,Z)
- Max Workpiece : 500 lbs Maximum
Acceptable Materials
With the proper tooling, many materials can be machined. Common choices are Aluminum, Steel, and Acetal plastic ("Delrin").
Setup
Setup guide / workflow
Resources
Manual
Discourse Links
SIG Information
External Resources
Troubleshooting
Common Problems
How to fix it / Contact steward or fill out a problem report