Asmbly has purchased two new Prusa MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class.
ASMBLY Prusa i3 MK3S+ Printers
Apollo
| Status |
Active
|
| Manufacturer |
Prusa
|
| Model |
i3 MK3S+
|
| Nozzle Size |
0.4mm
|
| Nozzle Type |
Hardened Steel
|
| Nozzle Count |
1
|
| Filament Size |
1.75mm
|
| Print Volume |
250 x 210 x 210mm
|
| Max Bed Temperature |
110C
|
| Max Nozzle Temperature |
305C
|
| Max Print Speed |
100mm/s
|
| Extruder Type |
Direct
|
| Manual |
Unknown
|
| Control Interface |
Unknown
|
| Network Address |
http://192.168.0.175:5001
|
|
Hermes
| Status |
Active
|
| Manufacturer |
Prusa
|
| Model |
i3 MK3S+
|
| Nozzle Size |
0.4mm
|
| Nozzle Type |
Hardened Steel
|
| Nozzle Count |
1
|
| Filament Size |
1.75mm
|
| Print Volume |
250 x 210 x 210mm
|
| Max Bed Temperature |
110C
|
| Max Nozzle Temperature |
305C
|
| Max Print Speed |
100mm/s
|
| Extruder Type |
Direct
|
| Manual |
Unknown
|
| Control Interface |
Unknown
|
| Network Address |
http://192.168.0.175:5000
|
|
Resources
Maintenance
This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.
Members must complete the 3D Printing Class before using this tool
