Prusa MK3S+

Members must complete the 3D Printing Class before using this tool

Asmbly has purchased two new Prusa i3 MK3S+ 3D Printers. As of now, these are the recommended 3D printers for new users and will be covered in the Intro to 3D Printing class. Both printers live in the left half of the printing enclosure. The one on the left is named Apollo, and the one on the right is named Hermes.

ASMBLY Prusa i3 MK3S+ Printers

Apollo Status Active Manufacturer Prusa Model i3 MK3S+ Nozzle Size 0.4mm Nozzle Type Hardened Steel Nozzle Count 1 Filament Size 1.75mm Print Volume 250 x 210 x 210mm Max Bed Temperature 110C Max Nozzle Temperature 305C Max Print Speed 100mm/s Extruder Type Direct Manual Unknown Control Interface Octoprint Network Address http://192.168.0.175:5001

Hermes Status Active Manufacturer Prusa Model i3 MK3S+ Nozzle Size 0.4mm Nozzle Type Hardened Steel Nozzle Count 1 Filament Size 1.75mm Print Volume 250 x 210 x 210mm Max Bed Temperature 110C Max Nozzle Temperature 305C Max Print Speed 100mm/s Extruder Type Direct Manual Unknown Control Interface Octoprint Network Address http://192.168.0.175:5000

Resources

• User Manual

Maintenance

This tool is owned by Asmbly Makerspace for the use of its members. Please contact the workshop committee if maintenance is required.