Tormach PCNC 1100 Overhaul

🛑 This page is a work in progress for the Wiki Overhaul project. Please visit Tormach_PCNC_1100 for authoritative information.

Members must complete the Tormach Class before using this tool

The Tormach PCNC 1100 is in an enclosure on the edge of the metal shop, adjoining the wood shop.

Specifications

Tormach PCNC 1100 Series 3

• 1.5hp R8 Spindle
• Table Size: 34" x 9.5"
• Table Slots: 3 Slots 5/8"
• Travel: 18" x 9.5" x 16.25" (X,Y,Z)
• Spindle Nose to Table: 17" maximum
• Spindle Center to Column: 11"
• Spindle Nose Diameter: 3 3/8"
• Max Workpiece : 500 lbs Maximum

Safety

Required Classes and PPE

You must take the Tormach Class before using this machine.

No special PPE is required for this machine, but hearing protection is advised in addition to the general shop requirements of safety glasses and closed-toed shoes. Safety glasses may be found on a shelf on the back side of the Tormach enclosure, near the horizontal bandsaw.

Use Case

The Tormach is used for CNC machining. It can be used to create precise parts out of a variety of materials, including metals, plastics, and wood.

Materials

Feeds and Speeds

The Tormach is configured in the High Belt position, which gives a range of 250-5140 RPM at the spindle. ProvenCut is a good source for tested feeds and speeds.

Maximum Sizes and Weights

• Travel: 18" x 9.5" x 16.25" (X,Y,Z)
• Max Workpiece : 500 lbs Maximum

Acceptable Materials

With the proper tooling, many materials can be machined. Common choices are Aluminum, Steel, and Acetal plastic ("Delrin").

Troubleshooting

Common Problems

How to fix it / Contact steward or fill out a problem report