File:Cleaner Filament in Extruder.jpg

Original file ‎(960 × 1,280 pixels, file size: 236 KB, MIME type: image/jpeg)

Cleaner Filament inserted into the Extruder

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:12, 8 March 2026		960 × 1,280 (236 KB)	Aneel (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 17
Exposure time	1/40 sec (0.025)
F Number	f/1.6
ISO speed rating	500
Date and time of data generation	13:55, 8 March 2026
Lens focal length	5.960000038147 mm
Latitude	30° 21′ 13.05″ N
Longitude	97° 40′ 18.91″ W
Altitude	213.188 meters above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	26.3.1
File change date and time	13:55, 8 March 2026
Exposure Program	Normal program
Exif version	2.32
Date and time of digitizing	13:55, 8 March 2026
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.3216395864106
APEX aperture	1.3561438531849
APEX brightness	-0.27817490055917
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	525
DateTimeDigitized subseconds	525
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1.0014025245442
Focal length in 35 mm film	26 mm
Scene capture type	Standard
GPS time (atomic clock)	18:55
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	True direction
Direction of image	318.77630610743
Reference for bearing of destination	True direction
Bearing of destination	318.77630610743
GPS date	8 March 2026