Difference between revisions of "Flashforge Creator Pro"

From Asmbly Wiki
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Required|3D Printing}}
+
{{Boneyard}}
{{ToolPhoto|Creator2Pro.jpg}}
+
{{ToolPhoto|Flashforge.png}}
  
The Flashforge Creator 2 Pro is a fully enclosed 3D Printer with independent dual extruders (IDEX). The IDEX setup uniquely allows this printer to extrude both nozzles at the same time in the following modes:
+
The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.
* Mirror Mode - Two objects horizontally mirrored
 
* Duplicate Mode - Two objects identical in orientation
 
* Multimaterial Mode - Print one object using multiple materials
 
* Soluble Support Mode - Print one object using one main material, and support material that washes away with a liquid
 
  
 
{{Infobox 3d printer
 
{{Infobox 3d printer
| Printer Name = Unknown Name (Creator 2 Pro)
+
| Printer Name = Unknown Name (Creator Pro)
| Status = {{PrinterInactive}}
+
| Status = {{PrinterRemoved}}
 
| Manufacturer = Flashforge
 
| Manufacturer = Flashforge
| Model = Creator 2 Pro
+
| Model = Creator Pro
 
| Network Address = Unknown
 
| Network Address = Unknown
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Size (mm) = 0.4
 
| Nozzle Type = Brass(?)
 
| Nozzle Type = Brass(?)
| Nozzle Count = 2 (IDEX)
+
| Nozzle Count = 2
 
| Filament Size (mm) = 1.75
 
| Filament Size (mm) = 1.75
| Print Volume (mm) = 200 x 148 x 150
+
| Print Volume (mm) = 227 x 148 x 150
| Max Bed Temperature (C) = 120(?)
+
| Max Bed Temperature (C) = 120
| Max Nozzle Temperature (C) = 240(?)
+
| Max Nozzle Temperature (C) = 240
| Max Print Speed (mm/s) = 100(?)
+
| Max Print Speed (mm/s) = 100
 
| Extruder Type = Direct
 
| Extruder Type = Direct
 
}}
 
}}
  
 
== Resources ==
 
== Resources ==
* [[Media:Creator2Pro_User_Manual.pdf|User Manual]]
+
* [[Media:CreatorPro_User_Manual.pdf|User Manual]]
 
 
{{Hosted|Russell Miller}}
 
[[Category:3D Printing]]
 

Latest revision as of 21:19, 24 March 2023


This tool is no longer at Asmbly Makerspace


The following information is maintained for historical purposes only. Currently operable tools are listed in the Master Tools List




Flashforge.png


The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.


Unknown Name (Creator Pro)
Status Retired
Manufacturer Flashforge
Model Creator Pro
Nozzle Size 0.4mm
Nozzle Type Brass(?)
Nozzle Count 2
Filament Size 1.75mm
Print Volume 227 x 148 x 150mm
Max Bed Temperature 120C
Max Nozzle Temperature 240C
Max Print Speed 100mm/s
Extruder Type Direct
Manual Unknown
Control Interface Unknown
Network Address Unknown



Resources