Difference between revisions of "Flashforge Creator Pro"
From Asmbly Wiki
| Line 14: | Line 14: | ||
| Nozzle Count = 2 | | Nozzle Count = 2 | ||
| Filament Size (mm) = 1.75 | | Filament Size (mm) = 1.75 | ||
| − | | Print Volume (mm) = | + | | Print Volume (mm) = 227 x 148 x 150 |
| − | | Max Bed Temperature (C) = | + | | Max Bed Temperature (C) = 120 |
| − | | Max Nozzle Temperature (C) = | + | | Max Nozzle Temperature (C) = 240 |
| − | | Max Print Speed (mm/s) = | + | | Max Print Speed (mm/s) = 100 |
| Extruder Type = Direct | | Extruder Type = Direct | ||
}} | }} | ||
Revision as of 03:58, 28 June 2022
Members must complete the 3D Printing Class before using this tool
The Flashforge Creator Pro is a fully enclosed 3D Printer with two extruders.
| Status | Working, Not Set Up |
| Manufacturer | Flashforge |
| Model | Creator Pro |
| Nozzle Size | 0.4mm |
| Nozzle Type | Brass(?) |
| Nozzle Count | 2 |
| Filament Size | 1.75mm |
| Print Volume | 227 x 148 x 150mm |
| Max Bed Temperature | 120C |
| Max Nozzle Temperature | 240C |
| Max Print Speed | 100mm/s |
| Extruder Type | Direct |
| Manual | Unknown |
| Control Interface | Unknown |
| Network Address | Unknown |
Resources
Maintenance
This tool is owned by Russell Miller and hosted at Asmbly for members to use. Please contact the workshop committee if maintenance is required.
